NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Rescue data from an no longer running system (RN10400-100EUS)
System has been shut down regularly at night time and booted automatically in the morning.
06/22/18 suddenly the system remains unbootet and the display showed an error msg (unfortunately I missed ...
First check the warranty status on your system. If you purchased it new, the hardware warranty is 3 years. If it is still covered, you can submit an RMA via my.netgear.com.
If you are not covered by warranty, then you might consider a risk-buy of a new power brick, as it is one possibility, and is inexpensive to try.
If you install mdadm and btrfs on your debian system, and can connect one of your two disks to it, then you should be able to mount the BTRFS partition. These commands shouuld do it.
# btrfs device scan
# btrfs fi show
# mount /dev/md127 /dataIf you purchase a new ReadyNAS, you can migrate the disks. The RN21x series is simplest, as it also uses an ARM processor.
An RN4xx series is also possible (and the RN422 has an LCD panel, which is convenient). It's an X86 NAS, so you might need to reinstall apps. Also when migrating from arm->x86, it's important to install a scratch disk on the new NAS first, and then match the firmware you have on the old one.
Either way, if you can extract the data from your RN104 disks, then I'd suggest doing a factory install, rebuilding the NAS, and reloading the data from backup. It will take a bit longer, but it would guarantee a clean system.
First check the warranty status on your system. If you purchased it new, the hardware warranty is 3 years. If it is still covered, you can submit an RMA via my.netgear.com.
If you are not covered by warranty, then you might consider a risk-buy of a new power brick, as it is one possibility, and is inexpensive to try.
If you install mdadm and btrfs on your debian system, and can connect one of your two disks to it, then you should be able to mount the BTRFS partition. These commands shouuld do it.
# btrfs device scan
# btrfs fi show
# mount /dev/md127 /data
If you purchase a new ReadyNAS, you can migrate the disks. The RN21x series is simplest, as it also uses an ARM processor.
An RN4xx series is also possible (and the RN422 has an LCD panel, which is convenient). It's an X86 NAS, so you might need to reinstall apps. Also when migrating from arm->x86, it's important to install a scratch disk on the new NAS first, and then match the firmware you have on the old one.
Either way, if you can extract the data from your RN104 disks, then I'd suggest doing a factory install, rebuilding the NAS, and reloading the data from backup. It will take a bit longer, but it would guarantee a clean system.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
