NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RN600-TL / X6 Update / Boot Problems
I bought a used RN600-TL / X6 to act as backup to my existing unit. When I powered it up, I got a Corrupt Boot error in the RAIDar screen. I did a factory reset, and reinitialized the 4 drives to RAID...
PMs stay in the outbox until read.
Unfortunately I got caught up with some other work.
That means you need to do TFTP boot recovery or USB Boot Recovery.
USB Boot Recovery is safer.
Power off the NAS and try doing a USB Boot Recovery of 4.1.8. That image is a bit smaller so is more likely to work
Is this a Rev A with a CF card?
Unfortunately I got caught up with some other work.
That means you need to do TFTP boot recovery or USB Boot Recovery.
USB Boot Recovery is safer.
Power off the NAS and try doing a USB Boot Recovery of 4.1.8. That image is a bit smaller so is more likely to work
Is this a Rev A with a CF card?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
