NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Igor_d
Nov 17, 2020Tutor
RNDP 6350 BIOS update
Good day. I want to upgrade my processor from stock E2160 to e7600. Do I need to update BIOS for this? I have seen reference to updating the bios to make the e7600 work, howerver I cannot see any...
- Nov 17, 2020
Yes, you will need an update to go to the E7600. I believe the fastest you can go with that BIOS version is the E6600. Since you are still on OS4.2.x, you can simply install this add-on to do the update: http://www.readynas.com/download/addons/x86/4.2/BIOS_Update_Package_0.5-x86.bin . If you've not already added RAM, you may want to do that as well. It will make the unit a bit faster, and it better prepares you to go to OS6, if you choose to do so.
Sandshark
Nov 17, 2020Sensei - Experienced User
Yes, you will need an update to go to the E7600. I believe the fastest you can go with that BIOS version is the E6600. Since you are still on OS4.2.x, you can simply install this add-on to do the update: http://www.readynas.com/download/addons/x86/4.2/BIOS_Update_Package_0.5-x86.bin . If you've not already added RAM, you may want to do that as well. It will make the unit a bit faster, and it better prepares you to go to OS6, if you choose to do so.
- Igor_dNov 17, 2020Tutor
Sandshark many thanks! =)
Original BIOS now upgraded to v02.61
Now I want to upgrade the RAM to 8GB on my RNDP6350.
Maybe you know the exact model of DDR2 RAM that will work?- SandsharkNov 18, 2020Sensei - Experienced User
The proper RAM to go to 8GB is hard to find and expensive when you do find it. You will also see very little improvement above 4GB unless you run a lot of memory-intensive apps.
You need PC2-6400 Non-registered, non-ECC, 2Rx8 (low density) RAM. Few at the time this was common were running a 64-bit OS that could use more than 4GB except for a server that typically used ECC and/or registered RAM, which is what makes it hard to find. 2Rx4 (high density) RAM is also often labeled "AMD only", and will not work.
I usually go for CL5 or better, though I'm not sure how much that helps. I've used several brands without issue, usually used on eBay. Going with faster RAM won't help. Though the E7400 is capable of a higher FSB speed, the motherboard is hardwired for 800MHz.
- Igor_dNov 18, 2020Tutor
Many thanks! =)
Related Content
NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!