NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Since Windows 11 Update, Unable to Access RNDuoV2.0 Dashboard/Admin Screen
Dear Forum Members It's been a good while since I have been on this forum, about March 2023, and as you can imagine I have run into some technical problems that I cannot work out for myself and w...
ukbobboy01 wrote:
Problem 1) Back in March 2023, I could access my RNDuo v2's admin screens by installing the Apache2_2.2.34-arm-0.0.1.bin utility on all my V2's. However lately, I have totally lost this “admin access” facility, despite trying all of my five browsers, i.e. Firefox, Opera, Chrome, Edge and AVG.
What error are you getting when you try to access the web ui?
Have you tried disabling antivirus (and any internet security software) running on the PC?
ukbobboy01 wrote:
Problem 2) One of my RNDuo v2's has a partial failure, I think the internal network card is having problems because no other device on my network can communicate with this device anymore, even though it can still be seen by but not accessed by RAIDar v6.0.
Is the IP address of this NAS in the range of your LAN subnet?
ukbobboy01 wrote:
Problem 3) Which is not really a problem but a search for some extra knowledge, I have just installed two 4TB WD Red Plus HDs in my RN104, both disks are now formatted and running as Raid 1.
What will happen if and when I add two more (unformatted/unused) WD Reds to my RN104?
If you are using XRAID:
- If you add two 4 TB drives, then the volume would be converted to RAID-5 and expand from 4 TB (~3.64 TiB) to 12 TB (~10.91 TiB). Note you could just add one 4 TB drive and expand to 8 TB (~7.27 TiB).
- If you add two larger disks (of the same size), then the capacity rule is "sum the disks and subtract the largest" So if you added two 8 TB, the capacity would grow to 16 TB. In this scenario, you would need to add two larger drives in order for the NAS to use all the space on the disks.
- If you add smaller disks, the NAS will ignore them.
Hi StephenB
Guess what, I was half way through writing my answers to your queries yesterday when my Internet connection went down. Luckily, I found the problem, the main internal telephone cable failed, and so I replaced it with a new one.
Now on with my reply.
Thanks for your reply, I will try to answer your questions as best I can:
You asked, in reply to my Problem 1)
What error are you getting when you try to access the web ui?
There are no errors, as such, just all my browsers are timing out.
Have you tried disabling antivirus (and any internet security software) running on the PC?
No, I've not disabled my Internet Security Software because I've not needed to before but I will try it now that you have suggested it. However, my RN102 and RN104 can still be accessed as before, i.e. no change.
You also asked, in reply to my Problem 2)
Is the IP address of this NAS in the range of your LAN subnet?
Yes it is, nothing has changed on my network, my IP and subnet addresses are still the same.
As for my RN104, thanks for that info as I was not 100% sure, although I suspected it, that the disk space would grow if I added an additional 2 x 4TB (or bigger) HDs.
Going back to the RNDuoV2.0 that partially failed, RAIDar (v.6) reports that this device is healthy, although the Admin, Browse and Locate buttons, when pressed, cannot find this device. I now believe that I did not vet this device properly before buying it from Ebay. I guess that since I've had many successful purchases I became too blasé, let my guard down and ended up purchasing a dud.
Anyway, I've purchased an external HD, a 4TB passport from WD, and plan to see if I can backup my data from that faulty RNDuoV2.0, using the front USB socket and backup button, in order to get my info back.
BTW, just found out that FW6.10.10, on my RN102 & 104, has locked certain features in place, i.e. I cannot upgrade plex, either automatically or manually, I'm stuck at version 1.11.3.4803. Nor can I downgrade the FW back to 6.10.9. where the updating facilities still existed.
Maybe I've got this wrong but until I can get my RN102 & RN104 working properly, i.e. do what I need them to do, I'm somewhat stuck.
My ReadyNAS adventures continue.
Cheers in advance
UK Bob
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
