NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Volume Expansion
Running a ReadyNAS 516, currently on firmware v6.10.1 and is showing it as "XRAID", not XRAID2. Has (6) 3TB drives and I'm running low on space. I found a drive on the drive compatibility guide that ...
Yes, it just says XRAID instead of XRAID2. But it is a newer version than on the legacy models. For one thing, the expansion limits you have read about do not exist on your NAS.
I personally tink it is a really bad idea to not have a separate forum area for legacy models, as quite a few things are different with them.
Yes, it just says XRAID instead of XRAID2. But it is a newer version than on the legacy models. For one thing, the expansion limits you have read about do not exist on your NAS.
I personally tink it is a really bad idea to not have a separate forum area for legacy models, as quite a few things are different with them.
gotcha, so there shouldn't be a problem at all doing what i want to do. no volume expansion limitations or anything. just replace 1 disk at a time, let it resync everything then continue to the next drive until all 6 are done.
syphonct wrote:
gotcha, so there shouldn't be a problem at all doing what i want to do. no volume expansion limitations or anything. just replace 1 disk at a time, let it resync everything then continue to the next drive until all 6 are done.
Correct.
Your data is at risk during the resync (since the volume is not protected during that process). So I do recommend making a backup.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
