NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Why my nas netgear Ready NAS 104 is re-synchronizing
suddendly my nas was not working good looking to the display it is sre-ynchronizing why is happening?
carlocki wrote:
i copy and paste the log but the post it has been always deleted
Likely triggered the spam filter. You can PM me (using the envelope link in the upper right of the forum page) if this happens again, as I can release spam. Or wait for a mod to get to it.
Anyway, there are no changes to the health - you are still seeing the one command timeout on each drive. I don't find that concerning, as it has not increased during the resync.
If the RAID is re-syncing, then one of the drives dropped out of the array. That's usually because there is a fault in the drive and the re-sync will either ultimately just fail, or the drive will fall out again. Because of the slow CPU and limited memory of the 104, it's not unusual that access to the NAS during re-sync is limited.
RAIDar should be able to show you which drive is re-syncing and what the progress is. If it's not progressing, then the drive is definately bad. If you come back with the RAIDar status, we can point you to the best next step.
Successfully completed diagnostics
System
Disk 1 has 1 Command Timeouts
Disk 2 has 1 Command Timeouts
Disk 3 has 1 Command Timeouts
Disk 4 has 1 Command Timeouts
Logs
2022-01-01 14:08:53: ufsd: "mount" (sde1): is mounted as NTFS(rw) at 2022-01-01 13:08:53
2022-01-01 12:41:35: ufsd: "mount" (sde1): is mounted as NTFS(rw) at 2022-01-01 11:41:35
2022-01-01 12:18:19: ufsd: "mount" (sde1): is mounted as NTFS(rw) at 2022-01-01 11:18:19
2021-12-31 23:01:27: ufsd: "umount" (sde1): is unmounted at 2021-12-31 22:01:27
2021-12-31 16:02:46: ufsd: "mount" (sde1): is mounted as NTFS(rw) at 2021-12-31 15:02:46
2021-12-31 14:01:20: ufsd: "umount" (sde1): is unmounted at 2021-12-31 13:01:20
2021-12-31 08:02:43: ufsd: "mount" (sde1): is mounted as NTFS(rw) at 2021-12-31 07:02:43
2021-12-30 23:01:14: ufsd: "umount" (sde1): is unmounted at 2021-12-30 22:01:14
2021-12-30 17:02:44: ufsd: "mount" (sde1): is mounted as NTFS(rw) at 2021-12-30 16:02:44
2021-12-30 11:02:21: ufsd: "umount" (sde1): is unmounted at 2021-12-30 10:02:21
2021-12-30 08:02:44: ufsd: "mount" (sde1): is mounted as NTFS(rw) at 2021-12-30 07:02:44
2021-12-29 23:01:31: ufsd: "umount" (sde1): is unmounted at 2021-12-29 22:01:31
2021-12-28 23:04:42: ufsd: "mount" (sde1): is mounted as NTFS(rw) at 2021-12-28 22:04:42
2021-12-28 23:00:48: ufsd: "umount" (sde1): is unmounted at 2021-12-28 22:00:48
2021-12-28 12:17:39: ufsd: "mount" (sde1): is mounted as NTFS(rw) at 2021-12-28 11:17:39
2021-12-27 23:01:28: ufsd: "umount" (sde1): is unmounted at 2021-12-27 22:01:28
2021-12-26 21:26:37: ufsd: "mount" (sde1): is mounted as NTFS(rw) at 2021-12-26 20:26:37
2021-12-26 20:02:35: ufsd: "umount" (sde1): is unmounted at 2021-12-26 19:02:35
2021-12-26 17:02:46: ufsd: "mount" (sde1): is mounted as NTFS(rw) at 2021-12-26 16:02:46
2021-12-26 14:01:51: ufsd: "umount" (sde1): is unmounted at 2021-12-26 13:01:51
2021-12-26 10:02:47: ufsd: "mount" (sde1): is mounted as NTFS(rw) at 2021-12-26 09:02:47
2021-12-25 21:01:26: ufsd: "umount" (sde1): is unmounted at 2021-12-25 20:01:26
2021-12-24 23:25:52: ufsd: "mount" (sde1): is mounted as NTFS(rw) at 2021-12-24 22:25:52
2021-12-24 23:00:50: ufsd: "umount" (sde1): is unmounted at 2021-12-24 22:00:50
2021-12-24 16:02:38: ufsd: "mount" (sde1): is mounted as NTFS(rw) at 2021-12-24 15:02:38
2021-12-24 14:02:19: ufsd: "umount" (sde1): is unmounted at 2021-12-24 13:02:19
2021-12-23 23:10:37: ufsd: "mount" (sde1): is mounted as NTFS(rw) at 2021-12-23 22:10:37
2021-12-23 23:00:56: ufsd: "umount" (sde1): is unmounted at 2021-12-23 22:00:56
2021-12-23 13:19:57: ufsd: "mount" (sde1): is mounted as NTFS(rw) at 2021-12-23 12:19:57registry
I redacted the log zip file - it shouldn't be shared publicly as there is privacy leakage.
One thing you should fix is the problem with email alerts not getting through. This could be a simple password problem, but you might also need to disable two factor authentication and all "less secure apps" in your gmail account settings.
You appear to be letting the NAS reboot while the resync is in progress. Don't let that happen, it increases the risk of data loss.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
