NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Your NETGEAR Storage is not accessible from this computer, please check your network setting.
RAIDAR finds netgear storage bus says is not accessible: Your NETGEAR Storage is not accessible from this computer, please check your network setting. Computer is PC running Windows 10. ReadyNA...
Open the Windows Credential Manager, and then enter a credential for 192.168.168.168. The username (and password) should be used by a ReadyNAS local account. Note that "admin" works for this.
Guess about 18 months approx
You could try powering down, and then reseating the two disks trays.
Are you using RAIDar 4.3.8?
Also, are you seeing one of these blinking led patterns?
LED blink behavior for 2 disk systems is three quick blinks of all disk LEDs and the backup LED, followed by an 1s delay, followed by a number of slow blinks. The number of slow blinks will be the error code.
Current error codes:
1 - Vendor mismatch
2 - No disks detected
3 - Bad contents on root partition of disks
4 - Flash error
5 - Unsupported RAID configuration
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
