Reply

Re: AC2000/WAC124 wired slow after a period of time - until restart

dave_jee
Initiate

AC2000/WAC124 wired slow after a period of time - until restart

Hi all,

 

I have a AC2000/WAC124 and after a certain period of time, maybe 3 hours, the speed drops.

This is on all connections, including wired.

On wired, the speed drops from over 900 Mbps down to 80-90 Mbps.

As soon as I restart the WAC124, the speed returns.

I am on 1.0.4.7 firmware. I have performed a factor reset earlier today.

I am connecting to the WAC124 via a wired Virgin Media SuperHub 4 .. The same issue also occured on a SuperHub 3

 

I am not sure what I can check now.

 

Thanks

 

 

 

Message 1 of 6
plemans
Guru

Re: AC2000/WAC124 wired slow after a period of time - until restart

Is the WAC124 setup in access point mode or router mode? 

How long has it been going on? 

What firmware version were you on when it started?

Current setup: CM2000-> RBKE963B-> Trendnet TEG-S380-> GS716T-> pi-hole
also in AP setup: RAXE500->EAX80
1.4gig download/50mbps upload from Xfinity
We’re members of the public helping out on our own time.
Message 2 of 6
dave_jee
Initiate

Re: AC2000/WAC124 wired slow after a period of time - until restart

Thanks for reply

 

Things have moved on. I had a different test result from before.... I bascially removed the WAC from the equation and went direct to the cable, and the same issue occured 😐

So I change the SuperHub 4 port, this has now been stable for the 2 days.

This would maybe rule out the WAC, but I have been wondering if the WAC could tell the SH4 to negotiate its speed down ... ?

 

I'll keep an eye on it and see it goes on, but seems good so far.

Message 3 of 6
plemans
Guru

Re: AC2000/WAC124 wired slow after a period of time - until restart

Good luck!

Good call on trying a different port on the superhub. I'm not a huge fan of them as they seem to cause a lot of issues. 

It could be it has its own QoS setup thats dropping speeds going to the WAC

Current setup: CM2000-> RBKE963B-> Trendnet TEG-S380-> GS716T-> pi-hole
also in AP setup: RAXE500->EAX80
1.4gig download/50mbps upload from Xfinity
We’re members of the public helping out on our own time.
Message 4 of 6
Dan1575
Initiate

Re: AC2000/WAC124 wired slow after a period of time - until restart

Same problem - but it is persisting.

 

In WAP mode it runs slow after a day.  So currently each morning I am rebooting the WAP and we are back up to full ISP speed.  It is as if some issue or other slows it down overnight?  Upgraded the firmware to 1.07 and that did not change it.

 

Runs fine after the re-boot.

Dan

Model: WAC124|AC2000 Dual Band 4x4
Message 5 of 6
plemans
Guru

Re: AC2000/WAC124 wired slow after a period of time - until restart

@Dan1575 Have you started your own thread? We recommend starting your own so your info doesn't get confused with the OP's. 

Current setup: CM2000-> RBKE963B-> Trendnet TEG-S380-> GS716T-> pi-hole
also in AP setup: RAXE500->EAX80
1.4gig download/50mbps upload from Xfinity
We’re members of the public helping out on our own time.
Message 6 of 6
Discussion stats
  • 5 replies
  • 1573 views
  • 3 kudos
  • 3 in conversation
Announcements