× NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Reply

Turn off RADIUS on WAC720

Dave1994
Aspirant

Turn off RADIUS on WAC720

Hi everyone,

 Looking to find how i can turn off RADIUS on a WAC720. Looks like Sherminator had the same issue back in June 2018 but unfortunately the reply from Raghu was over PM.

So if does know how that would be great to save our firewall blocking this every few seconds.

Many thanks

 

 

 

 
Model: WAC720|2x2 Wireless-AC Access Points
Message 1 of 3

Accepted Solutions
RaghuHR
NETGEAR Expert

Re: Turn off RADIUS on WAC720

Hi @Dave1994 

 

In the radius server settings page you can leave blank for the primary authentication &  accounting server. By doing this AP will internally turn off the radius.  Let me know how it goes.

 

Thanks,

Raghu

 

View solution in original post

Message 2 of 3

All Replies
RaghuHR
NETGEAR Expert

Re: Turn off RADIUS on WAC720

Hi @Dave1994 

 

In the radius server settings page you can leave blank for the primary authentication &  accounting server. By doing this AP will internally turn off the radius.  Let me know how it goes.

 

Thanks,

Raghu

 

Message 2 of 3
Dave1994
Aspirant

Re: Turn off RADIUS on WAC720

Hi Raghu,

Many thanks for coming back with that. Works for IPv6 but for IPv4 you must have primary authentication entry but if you blank just the accounting server it does indeed turn it off.

 

Much appreciated

David

 

Message 3 of 3
Discussion stats
  • 2 replies
  • 2183 views
  • 0 kudos
  • 2 in conversation
Announcements