× NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Reply

Re: WC7600 Captive Portal and VLAN

Andreas123
Aspirant

WC7600 Captive Portal and VLAN

I have a WC7600 and 10 Aceesspoints in VLAN 6, IP 10.xx. The guest network is VLAN 5, 192.168.1.xx. Both networks can access the internet, but there is no routing in between. The captive portal is only on the IP address of the controller and can not be reached from the guest network. How is this usually solved? Ideal would be another address of the controller in VLAN 5, but I can not find it.

Model: WC7600|ProSafe Wireless Controller
Message 1 of 4

Accepted Solutions
Andreas123
Aspirant

Re: WC7600 Captive Portal and VLAN

Problem solved, it was a misconfigured switch on the way to the access point. 

View solution in original post

Model: WC7600|ProSafe Wireless Controller
Message 4 of 4

All Replies
Andreas123
Aspirant

Betreff: WC7600 Captive Portal and VLAN

or do I need a route from the guest network to the management network to reach the captive portal?

Model: WC7600|ProSafe Wireless Controller
Message 2 of 4
RaghuHR
NETGEAR Expert

Re: WC7600 Captive Portal and VLAN

Hi @Andreas123 

 

Could you please help us to understand your issue with network diagram? Also share your configurations.

 

Thanks,

Raghu

Message 3 of 4
Andreas123
Aspirant

Re: WC7600 Captive Portal and VLAN

Problem solved, it was a misconfigured switch on the way to the access point. 

Model: WC7600|ProSafe Wireless Controller
Message 4 of 4
Top Contributors
Discussion stats
  • 3 replies
  • 2348 views
  • 0 kudos
  • 2 in conversation
Announcements