Orbi WiFi 7 RBE973
Reply

Re: PLEASE HELP-CM1200 Modem event: Started Unicast Maintenance Ranging-No Response received

JasGr81
Aspirant

PLEASE HELP-CM1200 Modem event: Started Unicast Maintenance Ranging-No Response received

 

AFF6E9D4-317D-4D53-ADCA-DB306580DD38.jpeg

 

Model: CM1200|Nighthawk Multi-Gig Speed Cable Modem
Message 1 of 12
plemans
Guru

Re: PLEASE HELP-CM1200 Modem event: Started Unicast Maintenance Ranging-No Response received

Photos have to be approved by a moderator and can take a while. You can click on "choose file" and attach them that way. 

Please include the logs and the cable connections page

Message 2 of 12
FURRYe38
Guru

Re: PLEASE HELP-CM1200 Modem event: Started Unicast Maintenance Ranging-No Response received

Please post a copy and paste of the modems connection status page.
Have the ISP check the signal and line quality UP to the modem. Be sure the ISP provisions the modem correctly.
Be sure there are no coax cable line splitters in the between the modem and ISP service box. 
Be sure your using good quality RG6 coax cable up to the modem. 
Be sure to power OFF the modem for 1 minute then back ON.
https://community.netgear.com/t5/Cable-Modems-Routers/General-info-and-Troubleshooting-for-Cable-Mod...
https://highspeed.tips/docsis-events/


@JasGr81 wrote:

 

AFF6E9D4-317D-4D53-ADCA-DB306580DD38.jpeg

 


 

Message 3 of 12
JasGr81
Aspirant

Re: PLEASE HELP-CM1200 Modem event: Started Unicast Maintenance Ranging-No Response received

Netgear CM1200 Modem 1.PNGNetgear CM1200 Modem.png

Model: CM1200|Nighthawk Multi-Gig Speed Cable Modem
Message 4 of 12
JasGr81
Aspirant

Re: PLEASE HELP-CM1200 Modem event: Started Unicast Maintenance Ranging-No Response received

Netgear CM1200 Modem Connection.PNGNetgear CM1200 Modem Connection 2.PNGNetgear CM1200 Modem Connection 3.PNGNetgear CM1200 Modem Connection1.PNG

Model: CM1200|Nighthawk Multi-Gig Speed Cable Modem
Message 5 of 12
JasGr81
Aspirant

Re: PLEASE HELP-CM1200 Modem event: Started Unicast Maintenance Ranging-No Response received

Netgear CM1200 Modem Connection.PNGNetgear CM1200 Modem Connection1.PNGNetgear CM1200 Modem Connection 2.PNGNetgear CM1200 Modem Connection 3.PNG

Model: CM1200|Nighthawk Multi-Gig Speed Cable Modem
Message 6 of 12
FURRYe38
Guru

Re: PLEASE HELP-CM1200 Modem event: Started Unicast Maintenance Ranging-No Response received

What happens if you uncheck the "Enable Extended Upstream Transmit Power"? Something I never had enabled on my CM1200.

Message 7 of 12
plemans
Guru

Re: PLEASE HELP-CM1200 Modem event: Started Unicast Maintenance Ranging-No Response received

do you have a splitter or signal attenuator you can add? your power levels are running hot. 

Message 8 of 12
JasGr81
Aspirant

Re: PLEASE HELP-CM1200 Modem event: Started Unicast Maintenance Ranging-No Response received

Yeah I do but I just took it out because everyone kept telling me I shouldn't have any splitters. Just a straight cable from Spectrum's box on the outside of my house to my cable modem. So I took the splitter out.

Message 9 of 12
plemans
Guru

Re: PLEASE HELP-CM1200 Modem event: Started Unicast Maintenance Ranging-No Response received

how big of a splitter? 

Decent quality one? 

Your power levels are high and that can cause errors/line issues. 

If you try adding it back in or swapping it for a different one. 

I'd shoot for at least a triple splitter. 

Message 10 of 12
JasGr81
Aspirant

Re: PLEASE HELP-CM1200 Modem event: Started Unicast Maintenance Ranging-No Response received

This is the one I took out. Should I put it back in?813E8A29-6081-476A-8C33-C8BD48B912FC.jpeg

 

Message 11 of 12
plemans
Guru

Re: PLEASE HELP-CM1200 Modem event: Started Unicast Maintenance Ranging-No Response received

You can try that one but whatch for errors. If you add that and get your power levels where they need to be but start getting errors in the line, then I'd replace it with a different one. Half the reason we usually start with having people remove them is because they can introduce errors in the line. A decent quality one *shouldn't* but I've seen brand new ones cause issues so its a good troubleshooting step. 

Message 12 of 12
Top Contributors
Discussion stats
  • 11 replies
  • 2578 views
  • 0 kudos
  • 3 in conversation
Announcements

Orbi 770 Series