Reply

Re: C7000 enable SNMP/sFlow/Other Network Monitoring

E-Rock
Aspirant

C7000 enable SNMP/sFlow/Other Network Monitoring

I'm running a C7000-100NAS, hardware version 1.05 and firmware version V1.01.29.

I'm trying to figure out how to enable some sort of networking monitoring be it SNMP, sFlow, NetFlow, or some other type of network monitoring. The goal is catch errors, capture number of dropped packets, and monitor bandwidth usage of the device. If anyone has a solution out there, I'd greatly appreciate it.

Model: C7000|Nighthawk - AC1900 WiFi Cable Modem Router
Message 1 of 4
vkdelta
NETGEAR Employee

Re: C7000 enable SNMP/sFlow/Other Network Monitoring

none of those will work for you. 

 

SNMP is fully supported by it ONLY works from ISP side. ISP and NTGR blocks it from LAN side. 

 

 

you may want to look at scripting stuff via HTML/HTTP GUI. 

Message 2 of 4
E-Rock
Aspirant

Re: C7000 enable SNMP/sFlow/Other Network Monitoring

Is there an HTTP API available that I can reference to build a script?

Message 3 of 4
vkdelta
NETGEAR Employee

Re: C7000 enable SNMP/sFlow/Other Network Monitoring

no. nothing is available.

 

Few folks use some curl scripts to check I have seen previously in other forums. 

Message 4 of 4
Top Contributors
Discussion stats
  • 3 replies
  • 786 views
  • 0 kudos
  • 2 in conversation
Announcements