Orbi WiFi 7 RBE973
Reply

CV100V

Mike8Able
Aspirant

CV100V

Is there a way to change the ReadyShare IP Address?
Message 1 of 14
FURRYe38
Guru

Re: CV100V

Please confirm your product model #? 

 

Message 2 of 14
Mike8Able
Aspirant

Re: CV100V

Sorry C7100V.
Every since the last firmware update this Router performs differently than before. Speed is fine but Adding IP Addresses with an IP doesn’t seem to work any longer. I cannot see how RreadyShare locks an IP: 192.168.0.5???
Message 3 of 14
FURRYe38
Guru

Re: CV100V

Has a factory reset and setup from scratch been performed since the update? 

What browser are you using? Try IE11, Firefox or Opera...


@Mike8Able wrote:
Sorry C7100V.
Every since the last firmware update this Router performs differently than before. Speed is fine but Adding IP Addresses with an IP doesn’t seem to work any longer. I cannot see how RreadyShare locks an IP: 192.168.0.5???

 

Message 4 of 14
Mike8Able
Aspirant

Re: CV100V

Several Factory resets have been done and the browser has not bearing IP Address assigning.
Message 5 of 14
FURRYe38
Guru

Re: CV100V

I would open up a support ticked and get help from NG support regarding this:

https://www.netgear.com/mynetgear/registration/login.aspx

 

I would contact your ISP about this as well and ask them if they would downgrade the FW. ISPs are responsible to pushing FW out to modem. NG does not do this. They develop FW than hand off to ISP for futher testing before pushing out to modems. 

 

@vkdelta 

Message 6 of 14
Mike8Able
Aspirant

Re: CV100V

The Upgraded Firmware was from NetGear. That is one of the reasons I don’t have a Comcast modem anymore get because they pushed upgrades out all of the time.
Message 7 of 14
FURRYe38
Guru

Re: CV100V

I would talk to NG about this then. 

Message 8 of 14
vkdelta
NETGEAR Expert

Re: CV100V

Please explain the issue in bit more detail. 

It is hard to decipher the issue with browser not bearing address keyword for me.

 

Maybe you can list it in this way:

 

step1: login to the modem

step2: go to Advanced tab

step3: go to IP reservation tab.

 

 

step 10.. 

 

and provide some screenshots for us to see. 

Message 9 of 14
Mike8Able
Aspirant

Re: CV100V

Will send screen shots in the AM from computer. 😎
Message 10 of 14
Mike8Able
Aspirant

Re: CV100V

Here are some Screen Shots.

Message 11 of 14
Mike8Able
Aspirant

Re: CV100V

 
Message 12 of 14
Mike8Able
Aspirant

Re: CV100V

Also Note that Any Device I attempt to assign a Static IP Address to does not show the Device Name.  Nerver had this issue before.

Message 13 of 14
Mike8Able
Aspirant

Re: CV100V

Can Anyone please respond?

Message 14 of 14
Top Contributors
Discussion stats
  • 13 replies
  • 1396 views
  • 1 kudo
  • 3 in conversation
Announcements

Orbi WiFi 7