Re: LB1120 Bridge Mode - No Connectivity

iDragon · ‎2017-10-31

Ok, relieved to hear this, earlier messagein thread didn't sound very positive!

rini-kl · ‎2017-11-05

My current firmware/software that works. See attached screendump

hezor · ‎2017-11-16

Any detailed insight when the fixed LB2120-100EUS firmware will be available?

I'm currently having a UniFi Security Gateway 3P as my router and I will not buy this product until the fixed firmware will be available.

By the way, will there be an european version of the LB1120 available? It would satisfy my needs because the USG will be handling the WAN failover.

sr1986 · ‎2017-11-27

I have just purchased an LB2120NAS and would like to use this unit as a mobile failover when my wireline goes down. I have obtained a login, password, APN, and static IP from my carrier. I would like to place the LB2120 into bridge mode and let a Sonicwall perform NAT, DHCP, etc.

I have downloaded / installed the latest LB2120 firmware to patch the bridge mode issue. Here are the current modem specs from the about page. The unit has been power cycled several times since the upgrade.

Firmware Version: M18Q2_v12.09.163431

App Version: NTG9X07C_12.09.05.27

Web App Version: LBHDATA_03.03.103.165

Bootloader Version: Bootloader Ver: v1.0.0

Hardware Version: 08

I am not having any success with bridge mode and have several questions:

- Should a mobile profile be created in the LB2120 and always connected to in order for Bridge mode (IPPT) to function properly?

- On the firewall (Sonicwall) end, should my WAN type be set as Static IP, or PPPoE? The Static IP WAN type does not have an APN or service name field, and my carrier won't provide me a subnet mask or gateway address for the service. The PPPoE WAN type seems like a more likely candidate, however I can't seem to connect.

Any help woudl be appreciated. Thanks.

superjet · ‎2017-12-04

I'm currently going through support, I cannot for the life of me get this update to download without erroring out. I have been trying for almost 40 days straight. I use this modem only with cellular not as a failover. It would be really nice if they would just unlock telnet and let me manually apply the update.

Alex380 · ‎2017-12-04

December...

Also how can it be justified to not fix one regions products when another region gets fix?

TM-8 · ‎2017-12-05

Always Error Software Update:

Here the Data of the LB2120:

Firmware
Firmware Version: M18QW_v07.05.170721
Firmware Build Date: Unknown
App Version: NTG9X07W_13.04.00.00
Web App Version: LBHDATA_03.03.103.159
Bootloader Version: Bootloader Ver: v1.0.0
Hardware Version: 08

Device
Model: LB1120
LB2120 Manager: 192.168.5.1
PRI Version: 23113401, 00.05
Power State: Init
Current temperature: 42°C

Can You send me a link how can i download the new Beta Firmware?

keasley · ‎2017-12-05

Currently deployed to Afghanistan and using Etisalat.af as my LTE service provider, got the APN settings and no go on either router or bridge mode. Etisalat listed as a valid provider.

SKU: LB1121-100NAS

IMEI: 014754000019907

H/W: 1.0(0600)

Could really use it to keep in touch with family and friends and keeping my mind of certain things over here. Any update on the firmware udpate.

bossss7 · ‎2017-12-16

Happy to report that the LB2120-AUS (Australian version) now works perfectly in bridge mode using the latest firmaware (Image attached). This unit is connected to an FVS336Gv3 firewall.

Upgrading the firmware was a bit of a task, as I had to click the 'Check for updates' button repeatedly until it actually decided to start downloading. Just kept getting error messages before that.

Other than that, all good now! Excellent product now that it's working as intended.

iDragon · ‎2017-12-16

Still awaiting the promised euro update, though I'm at this point not surprised it hasn't turned up yet.

bossss7 · ‎2017-12-17

Which device are you reffering to? If it's the LB2120, the EU update should be available already as the AUS update was released not long ago. Seems like the AUS and EU version are exactly the same...

If you get a 'Couldn't update your device' error, then just keep clicking on 'Check for updates' until it works. I have two devices, on of them picked up the update after 5 clicks, the other took about 50. It'll get there eventually...

iDragon · ‎2017-12-17

LB1110, ie, eu equivalent to this thread's title.

bossss7 · ‎2017-12-18

You might be out of luck, sorry. Dunno if this includes yours but it seems to be part of the same series. From this thread:

The LB1111-100EUS model has been EOL'd so there will be no more new firmware updates for this particular model. LB2120-100EUS can be used as replacment but LB2120-100EUS does not support PoE.

Message 89 of 112

iDragon · ‎2017-12-18

I queried this at time of seeing that message to DarrenM and got the following reply:

"

DarrenM

‎2017-11-01 12:42 AM

Re: LB1110 Bridge

The firmware is coming to europe devices in the coming weeks.

DarrenM"

Specifically querying about the LB1110 and was reassured that it was still coming, I'm hoping this was not incorrect.

bossss7 · ‎2017-12-18

That's good to hear. Might just be a waiting game now...

When you try to update, do you get "No updates available'" or "Your device couldn't be updated" error?

iDragon · ‎2017-12-18

No updates available.

ssstofff · ‎2017-12-19

I'm having the exact same issue with a LB2120.
The firmware details are this:

Firmware Version: M18QW_v07.05.170721
App Version: NTG9X07W_13.04.00.00
Web App Version: LBHDATA_03.03.103.159
Bootloader Ver: v1.0.0
Hardware Version: 08

There are nu updates available.

bossss7 · ‎2017-12-19

Looks like you have to keep waiting unfortunately. 😞

LoLeDi · ‎2018-01-07

I cant update the firmware either, it says there are no updates available, tried clicking about 100 times

LoLeDi · ‎2018-01-07

I forgot to mention, I'm in australia, shouldn't this already be available? Thanks

bossss7 · ‎2018-01-07

Yeah it definitely should be available.

Where did you get your unit from?

Can you post a screen shot of your firmware?

ssstofff · ‎2018-01-07

Hi, these are the technical details of my device. I bought it in Belgium.

LoLeDi · ‎2018-01-10

not sure what happened to my post but this is take 2, here are my firmware details thanks bosss7, would be great if I can get this update working:

Firmware

Firmware Version: M18QW_v07.05.170721
Firmware Build Date: Unknown
App Version: NTG9X07W_13.05.02.00
Web App Version: LBHDATA_03.03.103.165
Bootloader Version: Bootloader Ver: v1.0.0
Hardware Version: 08

LoLeDi · ‎2018-01-10

test

bossss7 · ‎2018-01-10

Ah okay. In that case you have the EU version, for which the firmware still hasn't been released apparently, unless a Netgear rep can confirm that it has...

The Australian version can be bought from JB Hifi, for which the new (and fixed) firmware is available.

Re: LB1120 Bridge Mode - No Connectivity