×  Introducing Nighthawk RS700 WiFi 7 (BE) Router. For more details, please visit Nighthawk Tri-Band WiFi 7 Router.
Reply

Re: Netgear Nighthawk m1 MR1100 Firmware 12.06.08 available

Sebastiii
Star

Netgear Nighthawk m1 MR1100 Firmware 12.06.08 available

Hello,

A new firmware update available in web interface 12.06.08.

Quick test looks goods, maybe it will fix reboot issues.

No changlog available so far it seems

 

 

Model: MR1100|Nighthawk M1 Mobile Router
Message 1 of 19
mli
Tutor
Tutor

Re: Netgear Nighthawk m1 MR1100 Firmware 12.06.08 available

No problems on USB power and battery out? Smiley Happy

Message 2 of 19
Sebastiii
Star

Re: Netgear Nighthawk m1 MR1100 Firmware 12.06.08 available

I did a quick test with original power supply and no more reboot 🙂 (without battery)

UST Tether continue to works.

I did have a wifi issue for 5G sometimes, i did a factory reset just to be sure it's not related to firmware update partially updated.

 

Model: MR1100|Nighthawk M1 Mobile Router
Message 3 of 19
MikaelDui
Guide

Re: Netgear Nighthawk m1 MR1100 Firmware 12.06.08 available

I'm experiencing some issues with native IPv4 and IPv6 dual stack.

Only either IPv4 works or only IPv6 works.

 

When only IPv4 works I can't even see any IPv6 address under Settings -> Status -> Network.

When only IPv6 works I can see an IPv4 address.

 

I've not gotten both working at all with this update and I've reset the device multiple times as well as restarted it and using settings backups.

 

My phone using the same LTE carrier has no issues doing both IPv4 and IPv6 at the same time.

Best regards,
Mikael Dúi Bolinder
Model: MR1100|Nighthawk M1 Mobile Router
Message 4 of 19
MikaelDui
Guide

Re: Netgear Nighthawk m1 MR1100 Firmware 12.06.08 available

To solve the IPv4/IPv6 issue I just waited a while and then did another reset. Everything solved and IPv4 and IPv6 works flawlessly again.

Best regards,
Mikael Dúi Bolinder
Model: MR1100|Nighthawk M1 Mobile Router
Message 5 of 19
Sebastiii
Star

Re: Netgear Nighthawk m1 MR1100 Firmware 12.06.08 available

Hi,
This is the changelog :
https://kb.netgear.com/000061374/MR1100-Firmware-Version-12-06-08-00

Also, I have done another firmware update and in final, it was the same version number.
And this time, it gives me back ethernet standby option. 🙂
Model: MR1100|Nighthawk M1 Mobile Router
Message 6 of 19
thom127
Aspirant

Re: Netgear Nighthawk m1 MR1100 Firmware 12.06.08 available

Is your App still Working? For me the mobile app isn’t working so I can’t change my data limits. Is that also possible via the web interface? I liked using the app but it tells me now it’s not possible to use this router with the app...
Model: MR1100|Nighthawk M1 Mobile Router
Message 7 of 19
thom127
Aspirant

Re: Netgear Nighthawk m1 MR1100 Firmware 12.06.08 available

My fault, was because of a proxy in between. All working 🙂
Message 8 of 19
Viewpoint
Aspirant

Re: Netgear Nighthawk m1 MR1100 Firmware 12.06.08 available

Hi, since downloading this firmware, I’ve had continuous internet dropping every few minutes. It only comes back on after rebooting. Weird thing though, it will stay on all day so f you’re streaming something. As soon as there’s not constant flow of data, 3 -5 minutes it’s out and have to reboot. Anyone here have any tips?
Model: MR1100|Nighthawk M1 Mobile Router
Message 9 of 19
Sebastiii
Star

Re: Netgear Nighthawk m1 MR1100 Firmware 12.06.08 available

Hi, it looks like ethernet standby issue nut set to disable. This option is back on the latest firmware on my side. Twice update from same number build. Maybe look at this option 👍
Model: MR1100|Nighthawk M1 Mobile Router
Message 10 of 19
Viewpoint
Aspirant

Re: Netgear Nighthawk m1 MR1100 Firmware 12.06.08 available

I have checked this settings to ensure it was on “never”. It did not change anything. I do feel it is a bug in the standby settings. I have to stream a radio station in the background to keep the internet going.
Model: MR1100|Nighthawk M1 Mobile Router
Message 11 of 19
Sebastiii
Star

Re: Netgear Nighthawk m1 MR1100 Firmware 12.06.08 available

I've looked at the setting and I have set it to "ETHERNET STANDBY" to "Disabled"

But like I have a device connected to internet 24/24 even if not much data over this device, it can act like keepalive thingy.

I remember doing a fresh reset setting after the upgrade too to clean in case of leftover strange settings.

So maybe this is a bug but can be triggered here at least.

Model: MR1100|Nighthawk M1 Mobile Router
Message 12 of 19
MikaelDui
Guide

Re: Netgear Nighthawk m1 MR1100 Firmware 12.06.08 available

I've had the same issue, internet dropping all the time, often just 5 minutes after restarting the router.

But, I've not had the issue for over 1 week now - I've transfered over 100 GB without issues. I plugged it into a Quick Charge charger and did a factory reset. However, my ISP was having some trouble with the data at the same time so I'm not sure if it was the ISP or the Nighthawk.

Best regards,
Mikael Dúi Bolinder
Model: MR1100|Nighthawk M1 Mobile Router
Message 13 of 19
Sebastiii
Star

Re: Netgear Nighthawk m1 MR1100 Firmware 12.06.08 available

Good point, I have also change original power supply by quick charge one 🙂

Model: MR1100|Nighthawk M1 Mobile Router
Message 14 of 19
MikaelDui
Guide

Re: Netgear Nighthawk m1 MR1100 Firmware 12.06.08 available

Mine has now been returned (RMA) because of the constant internet drops after this update.

While looking at how to return it the internet connection dropped 3 times!

I'll wait for a replacement unit since there are no other mobile routers near as powerful as this one - I don't want to downgrade to Cat 4/6/9.
Best regards,
Mikael Dúi Bolinder
Model: MR1100|Nighthawk M1 Mobile Router
Message 15 of 19
Viewpoint
Aspirant

Re: Netgear Nighthawk m1 MR1100 Firmware 12.06.08 available

I don't know why, but for some reason, seeing that the two other posts had something to do with charging, I removed the battery and powered directly from the charging cable.  I haven't had a drop since.  I also rechecked that the wifi standby was disabled.  I'm not sure which one did it but I'm positive that I've had the wifi standby disabled prior.  But after so many reboots and factory resets it may have slipped by.  Either way  check these two, no more problems.

Message 16 of 19
dv83d
Aspirant

Re: Netgear Nighthawk m1 MR1100 Firmware 12.06.08 available

AT&T 6420B band 14 model works with this latest firmware?

Message 17 of 19
Sebastiii
Star

Re: Netgear Nighthawk m1 MR1100 Firmware 12.06.08 available

I have removed the battery too. MR1 is connected to quick charger and also on backup ups.
Model: MR1100|Nighthawk M1 Mobile Router
Message 18 of 19
dv83d
Aspirant

Re: Netgear Nighthawk m1 MR1100 Firmware 12.06.08 available

I’m thinking of removing battery plug into USB power bank & plug power bank into outlet.

Message 19 of 19
Top Contributors
Discussion stats
  • 18 replies
  • 4488 views
  • 3 kudos
  • 6 in conversation
Announcements

Orbi WiFi 6E