D7000 wrong date and time after firmware update to 1.0.1.44

[stefanov]

After the firmware update to version 1.0.1.44_1.0.1 the VPN service didn't worked anymore, and I found out that the system date was set to January 01 1970.

I tried many solutions I've found on this and other forums, but none worked (DNS, port triggering for UDP 123, etc..).

The router did not synch the time anymore.

UPDATE:

I removed all the NAT rules I set up months ago, rebooted the router and BANG! the time is correct now!

I set up again the NAT rules, and the time is keeping synch correctly!!

This does not makes sense, but hope it can help someone.

StefanoV

---

Nighthawk D7000 Firmware Version V1.0.1.44_1.0.1

[DarrenM · Accepted solution]

Hello Stefanov

Thanks for sharing this fix for the problem you ran into.

DarrenM

[DarrenM · Accepted solution]

Hello Stefanov

Thanks for sharing this fix for the problem you ran into.

DarrenM