Orbi WiFi 7 RBE973
Reply

AC1900 After around 10 months use the two wireless radios failed

pinnerite
Aspirant

AC1900 After around 10 months use the two wireless radios failed

A firmware update from 1.0.0.26_ to 1.0.0.38_ did not help.

 

Wired still works fine.

 

A review of the firmware settings could identify no reasonsw.

 

Message 1 of 5
Retired_Member
Not applicable

Re: AC1900 After around 10 months use the two wireless radios failed

contact support via MYNetgear if you registered it

Message 2 of 5
pinnerite
Aspirant

Re: AC1900 After around 10 months use the two wireless radios failed

I tried registering the D7000 AC1900 Nighthawk dual-band wireless router.

The first time Netgear reported a server error

The second that the 13 digit serial number was wrong. Well they printed it on the device!

The third that the date of purchase was outside their manufacturing range.

 

So how do I contact them to get some response?

 

Message 3 of 5
Retired_Member
Not applicable

Re: AC1900 After around 10 months use the two wireless radios failed

If the device wounldn't register, I guess you should had dealt with it back then, When you had the power to return it. I'm not sure what you can do about it now. They're all geared up to go through the MyNetgear process.

 

Good Luck

Message 4 of 5

Re: AC1900 After around 10 months use the two wireless radios failed

Did you reset to factory settings?

 

This is sometimes needed after a firmware flash.

 

Message 5 of 5
Top Contributors
Discussion stats
  • 4 replies
  • 2622 views
  • 0 kudos
  • 3 in conversation
Announcements

Orbi WiFi 7