Reply
Highlighted
Aspirant

D7000v2 requires reboot at least every 7 days

This issue is with a D7000v2 router (the dropdown on this forum page does not have this listed and needs updating)

 

The router requires a reboot at least every 7-10 days. The symptoms indicating the need for a reboot are:

 

Wifi on Samsung phone drops out intermittently and fails to reconnect with authorisation failure for a correct stored password

Apple TV connections drop out

Cannot login to router admin page (192.168.0.1) from iMac computer eventually followed by loss of connection to internet from same iMac.

 

Ultimately I have to reboot router (power cycle) and everything works again for the next week.

 

This appears to be a firmware problem that might be shared with common code in other router versions e.g. R7000  see: https://community.netgear.com/t5/Nighthawk-WiFi-Routers/R7000-drops-internet-about-every-7-days-or-s...

 

Log files are emailed from this router every 24 hours to an email account. Looking through the log files does not reveal anything helpful to diagnose the problem.

 

Firmware version currently installed is V1.0.0.56_1.0.1

 

******

 

Updated firmware to V1.0.0.62_1.0.1 to see if this fixes the problem. Modem power-cycled at 1:04 pm Friday, 11 September 2020 (AEST)

Message 1 of 0
Model: D7000|Nighthawk AC1900 VDSL/ADSL Modem Router
Message 1 of 8
Highlighted
Guru

Re: D7000v2 requires reboot at least every 7 days

Please post about this over in the DSL modem forum:
https://community.netgear.com/t5/DSL-Modems-Routers/bd-p/home-dsl-modems-routers

 

Thank you, 


My Setup (Cable 900Mbps/50Mbps)>CAX80>RBK853 v3.1.16.6(Router Mode)
Additional NG HW: C7800/CM1100/CM1200/CM2000, Orbi CBK40, RBK50, R7800, R7960P,
EX7500/EX7700, XR450 and WNHDE111
Message 2 of 8
Highlighted
Aspirant

Re: D7000v2 requires reboot at least every 7 days

Seems to be in this forum already?

Message 3 of 8
Highlighted

Re: D7000v2 requires reboot at least every 7 days


@mhaselup wrote:

Seems to be in this forum already?


Netgear's moderators can move things to the appropriate place.

 

It may be in the right place now, but I am having a hard time trying to understand what the original message is for. Is it the reboot thing?

 

It might help if you told people what the modem is in front of this router, if there is one. The model number could be useful. Is it, by any chance, also a router, with a set of LAN ports on the back?

The reason for asking is that a lot of people turn up here trying to put a router behind a modem that is also a router. That can complicate troubleshooting.

Just another user.

My network DM200 -> R7800 -> GS316 -> PL1000 -> Orbi RBR40 -> Orbi RBS50Y -> RBS40V
Message 4 of 8
Highlighted
Aspirant

Re: D7000v2 requires reboot at least every 7 days

This relates to a D7000v2 router (being used a router connected to NBN i.e. nothing in front of it).

 

I believe the issue is unreliable Netgear firmware from which I have recently upgraded to hopefully fix the issue. It is currently running V1.0.0.62_1.0.1 and has been up for 4 days. Previously it wouldn't make it past 7-10 days before requiring a reboot so still a week to go on this test.

 

If the problem persists I will likely move over to DDWRT as it seems to be more stable and offers a more comprehensive set of features.

Model: D7000|Nighthawk AC1900 VDSL/ADSL Modem Router
Message 5 of 8
Highlighted

Re: D7000v2 requires reboot at least every 7 days

The lack of detailed information on your network makes it hard to even guess at what is happening.

 

 


@mhaselup wrote:

This relates to a D7000v2 router (being used a router connected to NBN i.e. nothing in front of it).

 

That's not normal. NBN usually has some sort of Internet technology that needs a modem.

 

You either need a modem in front of the D7000v2 in router mode, or you use it in modem/router mode. We still don't know what type of NBN you smoke.

 

What is the ISP and what is the flavour of NBN? This can affect the settings that you have to use for the modem.

 

That you are trying to login to the D7000v2 through 192.168.0.1 suggests that it is in modem/router mode. But that's just a guess.

 


@mhaselup wrote:

 

If the problem persists I will likely move over to DDWRT as it seems to be more stable and offers a more comprehensive set of features.


 

Is there alternative firmware for the D7000v2? The people who write stuff like DD-WRT don't usually mess around with modems. It isn't in the list of supported devices:

 

Supported Devices - DD-WRT Wiki

 

Just another user.

My network DM200 -> R7800 -> GS316 -> PL1000 -> Orbi RBR40 -> Orbi RBS50Y -> RBS40V
Message 6 of 8
Highlighted
Aspirant

Re: D7000v2 requires reboot at least every 7 days

This is my first test of firmwareV1.0.0.62_1.0.1 for the D7000v2. Router finally gave up after running for 6 days. LEDs on front panel are frozen so looks like the processor has hung. Have rebooted at 10:52am.

 

It's warm weather here today and the router is a bit warm. I'm wondering if this is a hardware overheating issue. If so I don't expect to get another 6 days before needing to reboot. I don't think the stock firmware allows the monitoring of CPU temperature.

 

As observed the DDWRT is unavailable for the D7000 router (it is available for the R7000 router only version) so I'm stuck with the stock firmware.

Model: D7000|Nighthawk AC1900 VDSL/ADSL Modem Router
Message 7 of 8
Highlighted
Aspirant

Re: D7000v2 requires reboot at least every 7 days

This is interesting https://community.netgear.com/t5/DSL-Modems-Routers/D7000-crashing-freezing-hanging-fix/m-p/1856576

 

When it hangs again (I have just rebooted at this point) I'll take a look inside and see if there is evidence of overheating being the problem.

Message 8 of 8
Discussion stats
  • 7 replies
  • 108 views
  • 0 kudos
  • 3 in conversation
Announcements