DGN2200v3 Firewall Settings Question

[John_Latter]

Hi,

I have just installed a NETGEAR DGN2200v3 router. I'm not very knowledgeable about these things and would like to know if my firewall settings are correct:

PORT FORWARDING

The "Action" is set to BLOCK ALWAYS. "Service Name", "LAN Server IP Address", and "WAN Servers" are all set to ANY (and "Enable" is set to YES).

PORT TRIGGERING

The "Disable Port Triggering" check-box has not been ticked - is this OK?

I would appreciate any help!

John Latter (current status: :confused:)

[jmizoguchi]

Yes, should be ok

Default of inbound should be block so should not need to be created

[John_Latter]

jmizoguchi wrote:
Yes, should be ok Default of inbound should be block so should not need to be created

Thank you!

John Latter (current status: :))

[jimpad]

Hey

New to this and l cant find the write new post link...?

Anyways saying as the question here has been answered, l hope John wont mind my hijacking it )

Anyway l have a DGN2200v3
N300 Wireless ADSL2+ Modem Router which has gone on the blink..litarty, first of all it was just dead, so l got a new adapter, now the power light flash Red/Green intermittently.

Any help would be appreciated.

[jmizoguchi]

For inboud/ forwarding? yes