Reply

Re: Nighthawk X4S D7800 Telstra NBN VDSL not working

Snooker144
Aspirant

Nighthawk X4S D7800 Telstra NBN VDSL not working

Nighthawk X4S D7800 Telstra NBN VDSL not working any help

Model: D7800|Nighthawk X4S – AC2600 WiFi VDSL/ADSL Modem Router
Message 1 of 10
80njc80
Apprentice

Re: Nighthawk X4S D7800 Telstra NBN VDSL not working

Agreed.  Very vague.  Not working? It works for me via FTTN on Telstra.  Have a look at the manual - Pg. 59 (Specify a VDSL Connection Without a Login).  Make sure the "Internet Setup" settings are identical.  Old firmware had issues but rectified in current builds... 

Message 2 of 10
Snooker144
Aspirant

Re: Nighthawk X4S D7800 Telstra NBN VDSL not working

Tried this but didnt work.Trying to  use my D7800 to connect to the nbn but not a hundred percent sure on how to do this.

 

Message 3 of 10
Snooker144
Aspirant

Re: Nighthawk X4S D7800 Telstra NBN VDSL not working

Does it take awhile to connect?

Model: D7000v2|Nighthawk AC1900 WiFi VDSL/ADSL Modem RouterD7800|Nighthawk X4S – AC2600 WiFi VDSL/ADSL Modem Router
Message 4 of 10
Snooker144
Aspirant

Re: Nighthawk X4S D7800 Telstra NBN VDSL not working

Sorry no help . Am looking for step by step on how to set the d7800 to connect to telstra nbn please.

 

Model: D7000v2|Nighthawk AC1900 WiFi VDSL/ADSL Modem RouterD7800|Nighthawk X4S – AC2600 WiFi VDSL/ADSL Modem Router
Message 5 of 10
Snooker144
Aspirant

Re: Nighthawk X4S D7800 Telstra NBN VDSL not working

how can i change the multiplexing mode netgear to llc-based please

 

Message 6 of 10
80njc80
Apprentice

Re: Nighthawk X4S D7800 Telstra NBN VDSL not working

The steup wzard for the most part will get the job done.  In my experience, it appeared to stale at points but bare with it...  Let us now how far you get.  The D7800 will configure the right setting for you.

Message 7 of 10
Snooker144
Aspirant

Re: Nighthawk X4S D7800 Telstra NBN VDSL not working

Ok i did this , so how do i tell its connected to nbn or is still the same as before.

Model: D7000v2|Nighthawk AC1900 WiFi VDSL/ADSL Modem RouterD7800|Nighthawk X4S – AC2600 WiFi VDSL/ADSL Modem Router
Message 8 of 10
80njc80
Apprentice

Re: Nighthawk X4S D7800 Telstra NBN VDSL not working

A speedtest will give you an idea if it is connected or not (http://www.speedtest.net/). Also, if the VDSL settings detailed in the manual are applied and you are connected to the internet then that  is also a good indicator.

 

Note:  Telstra will monitor the line for 24-48 hours to see if the connection is stable...   This can only be verified if their modem/router is in use so you may need to swap it over til confimed then switch back to the D7800 once completed.

Message 9 of 10
Dmhf50
Aspirant

Re: Nighthawk X4S D7800 Telstra NBN VDSL not working

Windows Pro 10 Large PC

Model: D7000v2|Nighthawk AC1900 WiFi VDSL/ADSL Modem RouterD7800|Nighthawk X4S – AC2600 WiFi VDSL/ADSL Modem Router
Message 10 of 10
Top Contributors
Discussion stats
  • 9 replies
  • 3011 views
  • 1 kudo
  • 3 in conversation
Announcements