Reply
Initial Contributor
Posts: 4
Registered: ‎2013-07-27

Problem with dgn2200v3

Hi,

During an software update I have had some problems so i reinstall The software throgh a simple web interface. But unfortunately after The second update I find a problem: The web interface doesn't run, i receive a page with 404 not found. So I try to update The software throgh tftp but i receive a timeout error.
Can you help me please?


Regards
Regular Contributor
Posts: 89,285
Registered: ‎2009-01-27

Re: Problem with dgn2200v3

Hard reset the router first and see if you have access or GUI and try tftp.
Still fails then you have brick router
VPN Case Study

VPNCASESTUDY.COM

"Our Second To None VPN Related Setup Case Study[/COLOR][/URL]

"One Stop Solution To Your Netgear VPN Connectivity"

*Visit the site for Non-VPN related Doc & Links* [Windows & Mac user/support]





June Mizoguchi-
Initial Contributor
Posts: 4
Registered: ‎2013-07-27

Re: Problem with dgn2200v3

Hi tryied to reset it but I haven't The access
Initial Contributor
Posts: 4
Registered: ‎2013-07-27

Re: Problem with dgn2200v3

The DHCP server runs but even if I reset The router it return me adress 192.168.0.x not 192.18.1.x
Regular Contributor
Posts: 89,285
Registered: ‎2009-01-27

Re: Problem with dgn2200v3

reset will go back to default so if bottom of the router say 192.168.0.x then it will default to that
VPN Case Study

VPNCASESTUDY.COM

"Our Second To None VPN Related Setup Case Study[/COLOR][/URL]

"One Stop Solution To Your Netgear VPN Connectivity"

*Visit the site for Non-VPN related Doc & Links* [Windows & Mac user/support]





June Mizoguchi-
Initial Contributor
Posts: 4
Registered: ‎2013-07-27

Re: Problem with dgn2200v3

The bottom of router says 192.168.1.x
Regular Contributor
Posts: 89,285
Registered: ‎2009-01-27

Re: Problem with dgn2200v3

Chances are hardware related issues if you done hard reset correctly

This model in some country is 2years warranty so I would login my.netgear.com and check warranty status and contact them via portal
VPN Case Study

VPNCASESTUDY.COM

"Our Second To None VPN Related Setup Case Study[/COLOR][/URL]

"One Stop Solution To Your Netgear VPN Connectivity"

*Visit the site for Non-VPN related Doc & Links* [Windows & Mac user/support]





June Mizoguchi-
Initial Contributor
Posts: 1
Registered: ‎2013-10-15

Re: Problem with dgn2200v3

Hi,


Was this problem solved ? If yes how ? I get the same issue :-(

I tried to upgrade my DGN2200v3 firmware using the web interface. It stopped during upgrade, saying that i had to reload the firmware.

Restarted the router to see if it solved the proble, but did not start any more. Connecting to 192.168.0.1 using eth cable, i got a page asking for choosing firmware file and proceed to the update. I did it.
I choosed DGN2200v3-V1.1.00.23_1.00.23.img file on my laptop, and restarted the upgrade.

Router rebooted well, without loosing my parameters. I can conect using wifi, and connect to the internet, it works well.

But when i try to acces the web interface, it asks authentication and then i get a bad page with "404 Not Found" message. I cannot acces the admin interface any more...

Didn't try to hard reset the router, as i'm afread of definitly loosing my internet access !

Please Help !

Many thanks in advance.


Arnaud
Discussion Stats
  • 7 replies
  • 2591 views
  • 0 kudos
  • 3 in conversation
Top Contributors