Remote Desktop Issue & enable ping (DGN1000V3)

[hatemelfarsy]

Dears,

I haver netgear router adsl and have static wan ip , can  not use remote desktop outside internal network and can not ping, and when create firewall rule RDP need ip from internal network not outside it (need same subnet)  , please help me to solve it urgent case

Router model : DGN 1000v3

note: Respond to Ping on Internet port is enable

Thanks

[TheEther]

Your problem description was unclear.  RDP uses TCP port 3389, so you should set up a port forwarding rule for that port.

[hatemelfarsy]

Rule created and and still face problem and can not ping 

inbound rule need IP from same subnet 

more than one face same problem please help me 

if change frameware to another framware , will solve or not 

[TheEther]

It sounds like you are not setting up the rule properly. The rule needs to point to the private IP address of the computer that you are trying to connect to via RDP.

For example, if your home subnet is 192.168.1.x and your computer has IP address 192.168.1.5, then the port forwarding rule needs to point to 192.168.1.5.

What IP address address were you entering? Your static WAN IP address?

[TheEther]

Also, the port forwarding rule is not going to make the computer pingable from the Internet. It will only allow RDP to work. It's fundamentality impossible to ping devices on a private network due to NAT.