Orbi WiFi 7 RBE973
Reply

enable telnet on router D6400

sgxnew54
Aspirant

enable telnet on router D6400

Hi guys,

I bought a d6400 and I would like enable telnet to adjust the snr  noise margin to increase the speed connection.

 

So I downloaded the utility telnetenable-0.4  and by linux terminal I used the cmd  "./telnetenable.linux <host IP> <host MAC> <user name> <password>", where user-name = Gearguy and password=Geardog.

 

from the terminal I had the following  answer "connect: Connection refused"

I don't know why ;  this cmd works on the router DGN2200, which  I tried before and  it works perfectly

 

so could you help me

 

OS Linux ubuntu 16.04

firmware router : V1.0.0.56_1.0.56

Model router : D6400  AC 1600 wifi VDSL/ADSL

 

 

 

 

thanks in advance

 

Model: D6400|AC1600 WiFi VDSL/ADSL Modem Router|802.11ac Dual Band Gigabit
Message 1 of 3

Accepted Solutions
DarrenM
Sr. NETGEAR Moderator

Re: enable telnet on router D6400

hello sgxnew54


You can check under http://192.168.1.1/debug.htm or http://192.168.0.1/debug.htm and see if the option is available.

 

DarrenM

View solution in original post

Message 2 of 3

All Replies
DarrenM
Sr. NETGEAR Moderator

Re: enable telnet on router D6400

hello sgxnew54


You can check under http://192.168.1.1/debug.htm or http://192.168.0.1/debug.htm and see if the option is available.

 

DarrenM

Message 2 of 3
sgxnew54
Aspirant

Re: enable telnet on router D6400

thanks DarrenM

 it works (192.168.0.1/debug.htm) ,   the  debug page appears and so  I could enable telnet.

 

regards

Sandro

Message 3 of 3
Top Contributors
Discussion stats
  • 2 replies
  • 5431 views
  • 0 kudos
  • 2 in conversation
Announcements

Orbi WiFi 7