Antworten

Backup der NAS-Daten auf externe Platte

Valerian
Aspirant

Backup der NAS-Daten auf externe Platte

Tach zusammen,

ich habe eine 4TB USB3 Platte an mein RN102 gehängt. Sie wird erkannt, ich kann über die ReadyNAS Weboberfläche darauf zugreifen und Datein daraufkopieren.

Allerdings kann ich keinen Backup-Job anlegen, der die Daten des NAS auf die externe Festplatte kopiert. Wenn ich den Dialog zur Neuanlage eines Jobs aufrufe, alle erforderlichen Felder ausfülle (local -> local) und anschließend auf "Weiter" klicke passiert gar nichts. Der Folgedialog, auf dem u.a. die Zeiten für den Job eingestellt werden wird nicht angezeigt.
Der Abbruch Knopf funktioniert jedoch noch, es ist also kein Absturz des Webinterface.

Was kann ich tun???

Herzliche Grüße,
Frank
Nachricht 1 von 4
RX
Luminary
Luminary

Re: Backup der NAS-Daten auf externe Platte

What is the current firmware version of your RN102?

Your concerns seems to be similar described on this forum link: viewtopic.php?f=31&t=80928

You may want to try the solution posted here: viewtopic.php?f=31&t=81001

- Thanks to Google Translate. I am open to corrections 🙂
Nachricht 2 von 4
Valerian
Aspirant

Re: Backup der NAS-Daten auf externe Platte

Well indeed, thanks for Google Translate. 😉
No corrections necessary as far as I can see.

My ReadyNAS is holding the 6.2.4 firmware.
And your suggestion points me to the right direction.

When I select a share as the target I could complete the job setup and change the target afterwards to any of the USB-Ports.
Right now my first backup job is running. Fingers crossed...

Thanks al lot!
Frank
Nachricht 3 von 4
RX
Luminary
Luminary

Re: Backup der NAS-Daten auf externe Platte

You're Welcome ! 🙂 Hope the backup job gets completed.
Nachricht 4 von 4
Diskussionsstatistiken
  • 3 Antworten
  • 2861 Aufrufe
  • 0 Kudos
  • 2 in Unterhaltung