DGND3300 v2 Can't add more than 2 port forwards

[seymourmj]

I have a UK Version DGND3300v2 With the latest Firmware 2.1.00.54_1.00.54

I am unable to add more than two port forwarding rules.

I can add the first two without issue. But when attempting to add the third the central frame pops up with the message No Data Received (When in Chrome, Slightly different messages when in any other browser but all meaning the same thing) Indicating almost like it cannot find the page? Picture included.



I am running a non stanard IP range

192.168.111.0/24

but don't see why this would be causing the issue.

Has anyone ever seen anything else similar?

It happens when trying to add a custom or a predefined rule.

if I try to add a port forward to 192.168.1.11 It recognises it as an incorrect range and correctly doesn't let me add it.

[jmizoguchi]

if I try to add a port forward to 192.168.1.11 It recognises it as an incorrect range and correctly doesn't let me add it.

You can NOT use 192.168.1.x when your router network change to 192.168.111.x


Far as third rules fails. I would hard reset the router first and try either from default ip and if that makes same behavior or not

[dhester]

Just dug out my old dgnd3300v2, with address range staring at 192.168.0.1 and 192.168.1.1 I can port forward multiple ports. If I set the range to 192.168.111.1 then I can only enter 2 rules. Also These are custom rules the predefined rules don't work at all.

This is firmware 2.1.00.54_1.00.54