IPTV problems

[greenwest]

Hello guys, i bought this router this summer (i was in USA with WORK&Travel program) i'm Russia and i Faced a problem, i cannot configure this router for IPTV at my inet provider.

My friend has russian version of this router (WNDR4000-100PES) and he don't have this problem, he got options for configure iptv like this:

https://dl.dropbox.com/u/40952568/79bd314ca73b.jpg


on my version of router (WNDR4000-100NAS) i don't have this configurations in same menu (the firmwares are same)

sorry for my bad language.

[jmizoguchi]

you likely need to buy the WNDR4000-100PES if firmware is same and not show the same info in the GUI

hardware must some where different

[greenwest]

but I thought that the hardware is the same, noone told me about PES AND NAS +(

[greenwest]

do i have any chances to configure IPTV for my stb on this router?

[jmizoguchi]

last three are usually designated as region.

you can contact support at my.netgear.com and if US region router can able to use in new location but I don't think there is much miracle

http://www.netgear.com/countries.aspx

got the countries specific site and flash their firmware if works.

[greenwest]

so US version of netgear wndr4000 doesn't have IPTV support ??

[jmizoguchi]

I don't think so.

[sakura18]

What is your router firmware?
it show that it will support IPTV feature using the latest Firmware.

[jmizoguchi]

Note: Please remember to do factory default after firmware upgrade. Enter "Backup Settings" in the web GUI and click "Erase" button of "Revert to factory default settings".

Bug Fixes and Enhancements:

Updated wireless driver to reduce code size.
Updated WPS router PIN feature.
Added Russian IPTV feature.
Added Russian dual WAN feature.
Changed the 5GHz band transmit power when GUI language or board region is Russian.
Router Spec update - gateway IP on a different subnet.
Change GUI documentation link to http://downloadcenter.netgear.com.
Fixed - DHCP stops working when connecting the HP Thin Client PC.
Fixed - Wireless button not working when scheduled wireless on/off is enabled.

WNDR4000 Firmware Version 1.0.0.90

Seems supports that not sure if model of PES and NAS (ex WNDR4000-xxx) will loaded different firmware options.?

[greenwest]

sakura18 wrote:
What is your router firmware? it show that it will support IPTV feature using the latest Firmware.

V.1.0.90_9.1.79 (WNDR4000 - NAS)

on my old d-link dir-100 for configure iptv i need to setup 1st lan port for PVID 35 (u can see screen)

https://dl.dropbox.com/u/40952568/vci.png

but i can't find this setup on netgear.

[jmizoguchi]

I think firmware ONLY updates IPTV on region specific models