Reply

Re: R6300v2 CH version, i want the original frimware

SulKing
Aspirant

R6300v2 CH version, i want the original frimware

Hello, i just got the r6300v2ch version from amazon, and i just wanna have the original frimware of netgear, not this one

can you please help me ? i tried dd-wrt frimware, alot of telnet versions, nothing worked out sadly.

Model: R6300v2|AC1750 Dual Band Gigabit router
Message 1 of 5
antinode
Guru

Re: R6300v2 CH version, i want the original frimware

> [...] i just got the r6300v2ch version from amazon, and i just wanna
> have the original frimware of netgear, [...]

 

   If your firmware version includes "CH", then your R6300v2 would seem
to have been provided originally by Charter (Spectrum), and what you
have now _is_ "the original frimware".

 

   If you want to try to install _generic_ Netgear R6300v2 firmware,
then you might try a Web search for your (unspecified) actual firmware
version.

 

> [...] i tried dd-wrt frimware, alot of telnet versions, nothing worked
> out sadly. [...]

 

   None of that is a useful problem description.  It does not say what
you did.  It does not say what happened when you did it.  As usual,
showing actual actions with their actual results (error messages, LED
indicators, ...) can be more helpful than vague descriptions or
interpretations.


   Possibly interesting:

 

      https://community.netgear.com/t5/x/x/m-p/1543374

Message 2 of 5
SulKing
Aspirant

Re: R6300v2 CH version, i want the original frimware

hey,i want the normal frimware not the CH one, is that possible ? 
when i try to install dd-wrt it just says its an old frimware and can't update it

most of the telnett that i tried everything goes thru when i enable telnet except one telnet from " http://www.antinode.info " 
when i try to enable telnet it says : nte: FAIL. No ACK message received.
how ever, even the other telnets everything goes fine, but when i try to connect via putty it says connection refused ;/
can you help me please?

Model: A6150|AC1200 Dual Band WiFi USB Mini Adapter, R6300v2|AC1750 Dual Band Gigabit router
Message 3 of 5
antinode
Guru

Re: R6300v2 CH version, i want the original frimware

> [...] i want the normal frimware not the CH one, is that possible ?

 

   Multiple people have said that they couldn't make it work.  At least
one claimed that he did.  I've never tried it, so I know nothing.


> when i try to install dd-wrt it just says its an old frimware and
> can't update it

 

   "try to install" how, exactly?  Have you tried using the TFTP
recovery method to install that firmware?

 

> most of the telnett that i tried everything goes thru when i enable
> telnet except one telnet from " http://www.antinode.info "
> when i try to enable telnet it says : nte: FAIL. No ACK message
> received.

 

   So far as I know, my "nte" program is the only one out there which
actually listens for a response from the target device.  All the others
just send the magic message, and hope for the best.

 

> how ever, even the other telnets everything goes fine, [...]

 

   With those other programs, not getting an error message tells you
very little.  (For example, try one with the wrong user name or
password.  It must fail, but do you get an error message?)

 

> [...] but when i try to connect via putty it says connection refused

 

   "connection refused" means that you can contact the router, but the
Telnet server is not listening.  In other words, the other program
failed to enable the Telnet server, but it failed silently.  ("nte"
knows when it fails, and it tells you.)

 

   When it works, it might look like this:

 

ITS $ nte n=192.168.1.1 m=50:6A:03:C9:8E:66 u=admin p=password
NTE: Received ACK message.  Telnet access should be enabled.

 

   But, with my weak psychic powers, I have no idea whether your
(undisclosed) "nte" command was correct.  If you specify the wrong user
name, password, or MAC address, then you can expect it to fail.  Note
that, as the README says, each interface on the router has its own MAC
address, and you must specify the MAC address of the LAN interface.

 

   It's been a long time since I looked at any of this stuff.  Remind
me -- What would you do with a Telnet connection if you could get it to
work?

Message 4 of 5
SulKing
Aspirant

Re: R6300v2 CH version, i want the original frimware

from the website, frimware updating, and i just tried tftp, aaand nope , it says " Connect request failed " 
yea i think the other telnets are not real i guess, because when i put a fake password or something it says that it has been sent
but i tried the Antinode one from other pc, and alot of resets , it just dosent work
i think i am doing it right too, i laucnh it from the cmd, running it as admin, then going to the file location and just typing the command after
but no luck at all

can you help me?

i will be typing these commands and after that i should be able to update it normaly, thats what people say atleast ;C

burnboardid U12H240T00_NETGEAR

nvram set board_id=U12H240T00_NETGEAR

 

i wish you can help me, thanks.

Message 5 of 5
Discussion stats
  • 4 replies
  • 929 views
  • 0 kudos
  • 2 in conversation
Announcements