Reply

Re: WNDR 3300 - Cannot access 192.168.1.1

stepchang
Aspirant

WNDR 3300 - Cannot access 192.168.1.1

Greetings community,

Originally, I had a Linksys router. I come home from work last night, and I noticed that my wifi got reset to the default network name. Cable modem was connected to the router, which was connected to my laptop. The internet worked fine, but it was not broadcasting a signal. Interestingly, I could not access 192.168.1.1!

I went to Best Buy that night and bought a brand new WNDR3300. I went home and tried to set up the connection.

First, the cable modem was connected to the new WNDR3300, which was connected to my laptop. I entered into the browser 192.168.1.1, entered default login [admin] and password and got into the router correctly. That was fine, but now there is no internet access. Cable modem does work, however.

I do a ipconfig renew and release. I unplugged the router and cable modem for different intervals of time. Now, the internet connected through the router WORKS. BUT, I cannot access 192.168.1.1 or routerlogin.net for that matter.


So my problem is:

1. When I am able to access routerlogin.net or 192.168.1.1, the internet that is connected through the router does not work. The router inside, however, shows IP and everything as 0.0.0.0.


2. When the internet through the router DOES work, I CANNOT access routerlogin.net or 192.168.1.1.


Keep in mind that everything was working til last night, when some settings were changed without my knowledge. I do not know what happened.

Please advise. Your help will be greatly appreciated.
Message 1 of 19
jmizoguchi
Virtuoso

Re: WNDR 3300 - Cannot access 192.168.1.1

most common question asked few dozens times

you must power down the cable modem each time you change the device.

turn off for 15min for the cable modem then hook up router after all the light is up and running for the cable modem
VPN Case Study

VPNCASESTUDY.COM

"Our Second To None VPN Related Setup Case Study[/COLOR][/URL]

"One Stop Solution To Your Netgear VPN Connectivity"

*Visit the site for Non-VPN related Doc & Links* [Windows & Mac user/support]





June Mizoguchi-
Message 2 of 19
jmizoguchi
Virtuoso

Re: WNDR 3300 - Cannot access 192.168.1.1

Wrong area
moving to rangemax next routers
VPN Case Study

VPNCASESTUDY.COM

"Our Second To None VPN Related Setup Case Study[/COLOR][/URL]

"One Stop Solution To Your Netgear VPN Connectivity"

*Visit the site for Non-VPN related Doc & Links* [Windows & Mac user/support]





June Mizoguchi-
Message 3 of 19
stepchang
Aspirant

Re: WNDR 3300 - Cannot access 192.168.1.1

Hi June,

Thank you.

Before I went to bed, I unplugged and turned off completely the cable modem and router for the entire night. This morning at 6 am, I went to plug in both, accessing 192.168.1.1 worked correctly, but there is no internet. I even did a system restore to no avail.

I know if I were to do a ipconfig release and renew, the internet WILL work through the netgear router. But then, I would not be able to access the router via 192.168.1.1 because my default IP in cmd prompt changes to something else.

This happened just last night on my old linksys router for the first time, so I know my settings were fine until then.

Do you think you know what is causing the problem? A windows 7 update maybe?
Message 4 of 19
jmizoguchi
Virtuoso

Re: WNDR 3300 - Cannot access 192.168.1.1

if you still have 0.0.0.0 on WAN/internet port of the router than use PC's mac address under router's basic setting and see
VPN Case Study

VPNCASESTUDY.COM

"Our Second To None VPN Related Setup Case Study[/COLOR][/URL]

"One Stop Solution To Your Netgear VPN Connectivity"

*Visit the site for Non-VPN related Doc & Links* [Windows & Mac user/support]





June Mizoguchi-
Message 5 of 19
stepchang
Aspirant

Re: WNDR 3300 - Cannot access 192.168.1.1

Interesting you mention that.

On my old linksys router, I had to clone my MAC address in the router website to get the internet working.

How can I clone this with the netgear routerlogin.net website?
Message 6 of 19
jmizoguchi
Virtuoso

Re: WNDR 3300 - Cannot access 192.168.1.1

stepchang wrote:
Interesting you mention that.

On my old linksys router, I had to clone my MAC address in the router website to get the internet working.

How can I clone this with the netgear routerlogin.net website?


router's interface
VPN Case Study

VPNCASESTUDY.COM

"Our Second To None VPN Related Setup Case Study[/COLOR][/URL]

"One Stop Solution To Your Netgear VPN Connectivity"

*Visit the site for Non-VPN related Doc & Links* [Windows & Mac user/support]





June Mizoguchi-
Message 7 of 19
stepchang
Aspirant

Re: WNDR 3300 - Cannot access 192.168.1.1


if you still have 0.0.0.0 on WAN/internet port of the router than use PC's mac address under router's basic setting and see


June,

Can you elaborate on this process? I'm selecting the option to use PC's MAC address, but IP still shows 0.0.0.0.

Thank you,
Stephen
Message 8 of 19
jmizoguchi
Virtuoso

Re: WNDR 3300 - Cannot access 192.168.1.1

stepchang wrote:
June,

Can you elaborate on this process? I'm selecting the option to use PC's MAC address, but IP still shows 0.0.0.0.

Thank you,
Stephen


you must turn the cable modem off each time you change it.
VPN Case Study

VPNCASESTUDY.COM

"Our Second To None VPN Related Setup Case Study[/COLOR][/URL]

"One Stop Solution To Your Netgear VPN Connectivity"

*Visit the site for Non-VPN related Doc & Links* [Windows & Mac user/support]





June Mizoguchi-
Message 9 of 19
stepchang
Aspirant

Re: WNDR 3300 - Cannot access 192.168.1.1

Would you recommend disconnecting the router from the modem, clone the MAC address within the router, turn of the modem for a few minutes, then turn on and connect the modem to the router?

Thank you,
Stephen
Message 10 of 19
jmizoguchi
Virtuoso

Re: WNDR 3300 - Cannot access 192.168.1.1

stepchang wrote:
Would you recommend disconnecting the router from the modem, clone the MAC address within the router, turn of the modem for a few minutes, then turn on and connect the modem to the router?

Thank you,
Stephen


yes..............
VPN Case Study

VPNCASESTUDY.COM

"Our Second To None VPN Related Setup Case Study[/COLOR][/URL]

"One Stop Solution To Your Netgear VPN Connectivity"

*Visit the site for Non-VPN related Doc & Links* [Windows & Mac user/support]





June Mizoguchi-
Message 11 of 19
stepchang
Aspirant

Re: WNDR 3300 - Cannot access 192.168.1.1

Not working! This is incredibly frustrating. I don't know what else to do, please advise. The router simply now can't detect a connection.
Message 12 of 19
jmizoguchi
Virtuoso

Re: WNDR 3300 - Cannot access 192.168.1.1

stepchang wrote:
Not working! This is incredibly frustrating. I don't know what else to do, please advise. The router simply now can't detect a connection.


try this... with all said prior on how to.. this time use linksys mac address and see
VPN Case Study

VPNCASESTUDY.COM

"Our Second To None VPN Related Setup Case Study[/COLOR][/URL]

"One Stop Solution To Your Netgear VPN Connectivity"

*Visit the site for Non-VPN related Doc & Links* [Windows & Mac user/support]





June Mizoguchi-
Message 13 of 19
stepchang
Aspirant

Re: WNDR 3300 - Cannot access 192.168.1.1

My linksys mac address = current one I'm using now. I just shut off my netgear router, turned it on and internet works. But now, I can't get into routerlogin.net AGAIN when internet works. This has been seesawing back and forth. Why is this happening? Smiley Sad Below is ipconfig: Microsoft Windows [Version 6.1.7600] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\Stephen Chang>ipconfig Windows IP Configuration Wireless LAN adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::64bf:da62:9762:b1ba%11 IPv4 Address. . . . . . . . . . . : 24.44.x.x Subnet Mask . . . . . . . . . . . : 255.255.252.0 Default Gateway . . . . . . . . . : 24.44.4.1 Tunnel adapter isatap.{91E1436C-B304-42A5-82E9-C2BE5C147752}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 9: Connection-specific DNS Suffix . : IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e50:c86:92d:e7d3:fa9d Link-local IPv6 Address . . . . . : fe80::c86:92d:e7d3:fa9d%12 Default Gateway . . . . . . . . . : Tunnel adapter isatap.{C4DC17B4-17CD-4B70-A712-35DA343BEFCD}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter 6TO4 Adapter: Connection-specific DNS Suffix . : IPv6 Address. . . . . . . . . . . : 2002:182c:562::182c:562 Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301
Message 14 of 19
jmizoguchi
Virtuoso

Re: WNDR 3300 - Cannot access 192.168.1.1

IPv4 Address. . . . . . . . . . . : 24.44.x.x
Subnet Mask . . . . . . . . . . . : 255.255.252.0
Default Gateway . . . . . . . . . : 24.44.4.1



IN red. IP seems like public IP

ipconfig /release
ipconfig /renew

should bring up 192.168.x.x IP
VPN Case Study

VPNCASESTUDY.COM

"Our Second To None VPN Related Setup Case Study[/COLOR][/URL]

"One Stop Solution To Your Netgear VPN Connectivity"

*Visit the site for Non-VPN related Doc & Links* [Windows & Mac user/support]





June Mizoguchi-
Message 15 of 19
topppps
Aspirant

Re: WNDR 3300 - Cannot access 192.168.1.1

Hi I have a netgear 814WG router modem I have the wireless part turned off and Im having trouble accessing my WNDR3300 I tried restarting both for an hr and am still not able to access 192.168.1.1


C:\Users\Benny>ipconfig

Windows IP Configuration


Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::d0cd:94a9:6941:313f%13
IPv4 Address. . . . . . . . . . . : 192.168.0.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1

Tunnel adapter isatap.{1FFC7C5C-C281-4CE6-A380-A291C45D6754}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76:847:6c1:3f57:fff5
Link-local IPv6 Address . . . . . : fe80::847:6c1:3f57:fff5%12
Default Gateway . . . . . . . . . : ::

C:\Users\Benny>

Confused on what Im doing wrong
Message 16 of 19
topppps
Aspirant

Re: WNDR 3300 - Cannot access 192.168.1.1

Hi I have a netgear 814WG router modem I have the wireless part turned off and Im having trouble accessing my WNDR3300 I tried restarting both for an hr and am still not able to access 192.168.1.1


C:\Users\Benny>ipconfig

Windows IP Configuration


Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::d0cd:94a9:6941:313f%13
IPv4 Address. . . . . . . . . . . : 192.168.0.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1

Tunnel adapter isatap.{1FFC7C5C-C281-4CE6-A380-A291C45D6754}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76:847:6c1:3f57:fff5
Link-local IPv6 Address . . . . . : fe80::847:6c1:3f57:fff5%12
Default Gateway . . . . . . . . . : ::

C:\Users\Benny>

Confused on what Im doing wrong
Message 17 of 19
jmizoguchi
Virtuoso

Re: WNDR 3300 - Cannot access 192.168.1.1

do not hijack a thread.

make your own thread
VPN Case Study

VPNCASESTUDY.COM

"Our Second To None VPN Related Setup Case Study[/COLOR][/URL]

"One Stop Solution To Your Netgear VPN Connectivity"

*Visit the site for Non-VPN related Doc & Links* [Windows & Mac user/support]





June Mizoguchi-
Message 18 of 19
richanann
Aspirant

Re: WNDR 3300 - Cannot access 192.168.1.1

jmizoguchi wrote:
router's interface


kindly solve my problem
Message 19 of 19
Top Contributors
Discussion stats
  • 18 replies
  • 6409 views
  • 0 kudos
  • 4 in conversation
Announcements