Orbi WiFi 7 RBE973
Reply

Re: Assigning IP address to pptp-user

Draga
Aspirant

Assigning IP address to pptp-user

SRX5308. Firmware Version: 4.3.4-2.

Configured PPTP Server, created "PPTP user".

The IP address for the user is allocated from the PPTP server range.

How to assign a specific ip address to a user?

 

Model: SRX5308|PROSAFE Gigabit Quad WAN SSL & IPSEC VPN Firewall
Message 1 of 3
JohnC_V
NETGEAR Moderator

Re: Assigning IP address to pptp-user

Hi Draga,

 

Welcome to our community! 🙂

 

It is not possible to set an IP reservation for PPTP in the SRX5308. But, you may try setting up a static IP within the range of the PPTP server's network in the PPTP user.

 

Configuring a PPTP VPN Tunnel to ProSAFE/ProSECURE routers.

 

If ever your concern has been addressed or resolved, I encourage you to mark the appropriate reply as the “Accepted Solution” so others can be confident in benefiting from the solution. The NETGEAR Community looks forward to hearing from you and being a helpful resource in the future!

 

Regards,

Message 2 of 3
Draga
Aspirant

Re: Assigning IP address to pptp-user

Hi.

I know about the ability to set IP on the client side. My old pptp-server allowed me to assign a fixed ip to a pptp-user.
Thanks
Message 3 of 3
Top Contributors
Discussion stats
  • 2 replies
  • 1377 views
  • 0 kudos
  • 2 in conversation
Announcements