I'm trying to use ipv6 on my network. My network has a modem router that get's a ipv6 /64 address from the provider. The modem router is configured to SLAAC. Behind the modem router I have the BR200. The modem router is connected to the WAN port of the BR200.
When enabling auto config for ipv6 I get the ipv6 for the BR200's WAN with the correct prefix. This looks fine to me.
What I now want is that my LAN is also configured for ipv6, but I am not sure how to achieve that. The LAN is now set to auto config also, but it say's:
Router's IPv6 Address On LAN Not Available
On this auto config page I am not able to change that.
If you can give me some advice that would be nice.
