Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
BR200 ipv6 auto config
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2020-12-19
07:31 AM
2020-12-19
07:31 AM
BR200 ipv6 auto config
Hello all,
I'm trying to use ipv6 on my network. My network has a modem router that get's a ipv6 /64 address from the provider. The modem router is configured to SLAAC. Behind the modem router I have the BR200. The modem router is connected to the WAN port of the BR200.
When enabling auto config for ipv6 I get the ipv6 for the BR200's WAN with the correct prefix. This looks fine to me.
What I now want is that my LAN is also configured for ipv6, but I am not sure how to achieve that. The LAN is now set to auto config also, but it say's:
Router's IPv6 Address On LAN Not Available
On this auto config page I am not able to change that.
If you can give me some advice that would be nice.
Message 1 of 2
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2021-01-19
10:11 AM