Hi , I need to create a IPsec VPN to an external supplier. Our local lan is on a 192.168.0.0/24 address, the supplier already has a customer in that range so what they have done is we have setup the VPN for our local address as 10.168.0.0/24 their remote address is 10.100.212.0/24. The VPN connect and the status is green. So what I have done our end is create a LAN2 on 10.168.0.0/24 and allocated a VLAN to it. The VLAN is tagged to all ports. On the PC I have added a second ip in the 10.168.0 range. Created a static route on the PC to route to 10.100.212.0 via 10.168.0.1. Whatever I do I cannot get the traffic to use the VPN is just uses the 192.168.0.1 router address even if the routing table on the PC does say to use 10.168.0.1 and the second address on the PC. Is this possible what I am trying to do on the BR500 or am I doing something wrong. Thanks
