Hello, I am trying to setup my router, FVS336GV2 vers. 3.0.9-02, to route http and https to forward to my VM webserver without any luck. I have another netgear router that is working correctly so I am comparing settings to see where I may have gone wrong.
I noticed in the working router, FVS336G vers. 3.0.6-25, under Security -> Services, it has a TCP entry of:
Web Server TCP 80 Normal Service
However, when I try to create this entry in the newer router I get the error, "Port range conflicts with default service or HTPPS port(s)".
So I am wondering if this could be why my router isn't letting traffic through to my web server or is it something else?
Thanks for your help,
AJ
Model: FVS336Gv2|PROSAFE DUAL WAN GIGABIT FIREWALL WITH SSL & IPSEC VPN
Hello, I am trying to setup my router, FVS336GV2 vers. 3.0.9-02, to route http and https to forward to my VM webserver without any luck. I have another netgear router that is working correctly so I am comparing settings to see where I may have gone wrong.
I suggest you to update the firmware of your FVS336Gv2 to the latest version which is v4.3.3-6 in a ladderized manner. First, update the firmware from v3.0.9-02 to v3.1.1-08. Then, update it from v3.1.1-08 to 4.3.1-18 and so on until you reach the latest which is v4.3.3-6. Afterwards, check if the same problem will occur.
You may want to perform a factory reset on the FVS336Gv2 after upgrading to the firmware to the latest version then reconfigure the settings from scratch in order to start clean using the latest firmware version.
