Orbi WiFi 7 RBE973
Reply

NETGEAR ProSafe™ Gigabit 8 Port VPN Firewall FVS318Gv2

paskal
Aspirant

NETGEAR ProSafe™ Gigabit 8 Port VPN Firewall FVS318Gv2

Hello,

 

set up the VPN Firewall to work with Iphone. All good its working.

Now want to connect a Windows 10 Client with Windows own VPN solution.

 

Tried to do with L2TP without IPSEC so i changed the registrey key like discript. Also tried with L2TP IPSEC and a PSK.

 

 

Mon Apr 03 16:15:35 2017 (GMT +0200): [FVS318Gv2] [IKE] ERROR:  Failed to get matching proposal for 9x.1xx.105.92[61138].
Mon Apr 03 16:15:35 2017 (GMT +0200): [FVS318Gv2] [IKE] ERROR:  No suitable proposal found for 9x.1xx.105.92[61138].
Mon Apr 03 16:15:35 2017 (GMT +0200): [FVS318Gv2] [IKE] WARNING:  Rejected phase 1 proposal as Peer's authentication method "pre-shared key" mismatched with Local "XAuth psk server".
Mon Apr 03 16:15:35 2017 (GMT +0200): [FVS318Gv2] [IKE] WARNING:  Rejected phase 1 proposal as Peer's dh_group "2048-bit MODP group" mismatched with Local "1024-bit MODP group".
Mon Apr 03 16:15:35 2017 (GMT +0200): [FVS318Gv2] [IKE] WARNING:  Rejected phase 1 proposal as Peer's authentication method "pre-shared key" mismatched with Local "XAuth psk server".
Mon Apr 03 16:15:35 2017 (GMT +0200): [FVS318Gv2] [IKE] WARNING:  Rejected phase 1 proposal as Peer's dh_group "2048-bit MODP group" mismatched with Local "1024-bit MODP group".
Mon Apr 03 16:15:35 2017 (GMT +0200): [FVS318Gv2] [IKE] WARNING:  Rejected phase 1 proposal as Peer's authentication method "pre-shared key" mismatched with Local "XAuth psk server".
Mon Apr 03 16:15:35 2017 (GMT +0200): [FVS318Gv2] [IKE] WARNING:  Rejected phase 1 proposal as Peer's encryption type "AES-CBC" mismatched with Local "3DES-CBC".
Mon Apr 03 16:15:35 2017 (GMT +0200): [FVS318Gv2] [IKE] ERROR:  invalid DH group 19.
Mon Apr 03 16:15:35 2017 (GMT +0200): [FVS318Gv2] [IKE] ERROR:  invalid DH group 20.
Mon Apr 03 16:15:35 2017 (GMT +0200): [FVS318Gv2] [IKE] INFO:  For x1.xxx.105.92[61138], Selected NAT-T version: RFC 3947
Mon Apr 03 16:15:35 2017 (GMT +0200): [FVS318Gv2] [IKE] INFO:  Received unknown Vendor ID
Mon Apr 03 16:15:35 2017 (GMT +0200): [FVS318Gv2] [IKE] INFO:  Received unknown Vendor ID
Mon Apr 03 16:15:35 2017 (GMT +0200): [FVS318Gv2] [IKE] INFO:  Received unknown Vendor ID
Mon Apr 03 16:15:35 2017 (GMT +0200): [FVS318Gv2] [IKE] INFO:  Received unknown Vendor ID

Tried both with IPSEC User and with L2TP User

 

 

Please help....

Model: FVS318Gv2|ProSafe gigabit 8 port VPN firewall
Message 1 of 2
train_wreck
Luminary

Re: NETGEAR ProSafe™ Gigabit 8 Port VPN Firewall FVS318Gv2

Post screenshots of the VPN config, make sure not to show your PSK.

 

btw, you shouldn't have to edit the registry to make the Win10 VPN client work. There's a horribly mistaken guide that's been posted around here that says you have to, but you don't and in fact shouldn't.

 

I made a guide for Win10 here: https://community.netgear.com/t5/VPN-Firewalls/FVS336Gv3-L2TP-IPsec-on-Windows-10/m-p/1063257/thread...

Message 2 of 2
Discussion stats
  • 1 reply
  • 1562 views
  • 0 kudos
  • 2 in conversation
Announcements