PC connected to L2TP VPN unable to access local LAN resources (192.168.1.0/24)

[Acester25]

I just want to allow PC outside our network to tunnel into our network and be able to access everything as if their PC was on our network.

I enabled the L2TP VPN with a 192.168.2.198 through 192.168.2.201 range and added the L2TP user...

The Win 7 PC gets connected but then cannot ping, telnet, RDP, or ftp to any devices in our local network range (192.168.1.0/24)...

What am I missing?  Do I need to add a static route?

The device we're using is Netgear Prosafe FVS318Gv2

Thanks!

Scott

[DaneA]

Hi Acester25,

Welcome to the community! 🙂

Not sure if this will help.  However, let me share the following articles below:

Configuring an L2TP VPN Tunnel to ProSAFE/ProSECURE routers

L2TP configure on Windows 7 (64 bit)

Regards,

DaneA
NETGEAR Community Team