- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
Simultaneous VPN Connections
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have the ProSafe VPN Client Professional software installed on my office laptop. All customers use the FVS318Gv2, FVS318N, and SRXN Firewall routers. Three clients have 2 offices connected by a VPN tunnel. I connect as a VPN client. For two of the three offices I can establish a simultaneous VPN connection to both routers at the same time. However on my third client the Tunnel will immediately close when I connect to the clients second router; both routers are on different subnets.
The other two customers who have two offices don't have this issue. I can establish a VPN Client connection simultaneously to each of their two routers. All of the offices have unique IP subnets so I can't understand why I can't maintain a two VPN client connections to the third client's two office routers.
Solved! Go to Solution.
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Augello,
Kindly share the client-to-box VPN configuration. Post screenshots as well as the logs from the VPN client to isolate the problem.
Let me share the KB article below and it might help:
ProSAFE VPN Client: Client to Box Configuration
Regards,
DaneA
NETGEAR Community Team
All Replies
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Augello,
Kindly share the client-to-box VPN configuration. Post screenshots as well as the logs from the VPN client to isolate the problem.
Let me share the KB article below and it might help:
ProSAFE VPN Client: Client to Box Configuration
Regards,
DaneA
NETGEAR Community Team