Orbi WiFi 7 RBE973
Reply

VLAN tagging on WAN Port

HerumakiloAgain
Aspirant

VLAN tagging on WAN Port

Can anyone advise whether or not it is possible to configure VLAN tagging on the WAN ports of the SRX5308 (Firmware Version: 4.3.5-3).

This is, unfortunately, a requirement of the ISP on the Austranlian NBN network.

The ISP in question (Commander) requires the following:

PPPoE over VLAN100 and mark all traffic including authentication 802.1p=0 

(from their website)

The supplied POS gateway wouldn't even qualify as a domestic unit, so I'm keen to just bin it and use the existing SRX instead.

 

Any help, greatly appreciated.

Message 1 of 3

Accepted Solutions
JohnC_V
NETGEAR Moderator

Re: VLAN tagging on WAN Port

Hi HerumakiloAgain,

 

Welcome to our community! 🙂

 

Unfortunately, SRX5308 does not support VLAN on the WAN port but you can assign PPPoE connection.

 

Regards,

 

John

NETGEAR Community Team

View solution in original post

Message 2 of 3

All Replies
JohnC_V
NETGEAR Moderator

Re: VLAN tagging on WAN Port

Hi HerumakiloAgain,

 

Welcome to our community! 🙂

 

Unfortunately, SRX5308 does not support VLAN on the WAN port but you can assign PPPoE connection.

 

Regards,

 

John

NETGEAR Community Team

Message 2 of 3
HerumakiloAgain
Aspirant

Re: VLAN tagging on WAN Port

Thanks.

Message 3 of 3
Discussion stats
  • 2 replies
  • 2144 views
  • 0 kudos
  • 2 in conversation
Announcements