Orbi WiFi 7 RBE973

Windows 10 Netgear ProSafe VPN Client not working at all or not well?

fred339
Tutor

Windows 10 Netgear ProSafe VPN Client not working at all or not well?

Using an FVS336Gv2 and Netgear ProSafe VPN client:

It works with Windows 7

It sometimes does not work at all with Windows 10.

It sometimes works with Windows 10 but has dropouts.

 

What should I do?

Message 1 of 14

Accepted Solutions
fred339
Tutor

Re: Windows 10 Netgear ProSafe VPN Client not working at all or not well?

OK.  It appears that we finally have it working.

This is using an FVS336Gv2 and we updated the firmware to the latest.  Perhaps this was the key change.

 

The clients are 5.51.001

Service: "IKE and AuthIP IPSEC Keying Modules" is Disabled.

 

It worked fine for Windows 7 but Windows 10 required that we uninstall the client and reinstall it after the router firmware change.

Now it seems to be working for all the Windows 10 machines.

View solution in original post

Message 12 of 14

All Replies
DaneA
NETGEAR Employee Retired

Re: Windows 10 Netgear ProSafe VPN Client not working at all or not well?

Hi fred339,

 

I have read this forum thread: https://community.netgear.com/t5/VPN-Software/Has-anyone-tested-Prosafe-VPN-Client-on-Windows-10/m-p... and you have tried the steps given but it did not work.  

 

Kindly refer to the image below and check if the Windows Compatibility Mode for Windows 7 would help:

 

Compatibility Mode for Windows 7.jpg

 

  

Regards,

 

DaneA

Netgear Community Team

Message 2 of 14
fred339
Tutor

Re: Windows 10 Netgear ProSafe VPN Client not working at all or not well?

I did that but no change on one that doesn't work.

The Console shows repeated:

Default (SA Ikev1Gateway-P-1) SEND phase 1 Aggressive Mode [SA] [KEY_EXCH] [NONCE] [ID] [VID] [VID][VID][VID][VID]

Message 3 of 14
JohnRo
NETGEAR Employee Retired

Re: Windows 10 Netgear ProSafe VPN Client not working at all or not well?

Hello fred339, 

 

 

What VPN software version are you using? Can you please test this version of the client software? Also, as what DaneA suggested you also have to run it in compatibility mode. 

 

I'll look forward to your response. 

 

Thanks,

Message 4 of 14
fred339
Tutor

Re: Windows 10 Netgear ProSafe VPN Client not working at all or not well?

So, the suggestion is to use the older version of the client software?  Actually have done that as well.

Also have done, as I said, everything that's suggested including the compatibility.

Message 5 of 14
DaneA
NETGEAR Employee Retired

Re: Windows 10 Netgear ProSafe VPN Client not working at all or not well?

Hi fred339,

 

It seems that you have exhausted all of the possible steps on your end.  You may want to consider to contact Netgear Support to have your problem be checked and logged: http://support.netgear.com/general/contact/.  Just to set your expectation, a support contract might be offered to you if ever your Netgear device is out of support warranty.

 

 

Regards,

 

DaneA

Netgear Community Team

Message 6 of 14
Sophostry
Aspirant

Re: Windows 10 Netgear ProSafe VPN Client not working at all or not well?

I justed tested it with my Windows 10 machine and it worked fine, connected and was able to access remotely.

 

It could be a configuration issue.  My version of the software is as follows:

 

vpnconf.exe 6.12.001
tgbikeng.exe 6.4.1
comlib.dll 4.1.0.1
tgbstarter.exe 4.2.0.4

Message 7 of 14
fred339
Tutor

Re: Windows 10 Netgear ProSafe VPN Client not working at all or not well?

What router and firmware is it interfacing with?

Message 8 of 14
Sophostry
Aspirant

Re: Windows 10 Netgear ProSafe VPN Client not working at all or not well?

UTM150, 3.6.2-1

 

The VPN software is really the same on all of them I find.

Message 9 of 14
fred339
Tutor

Re: Windows 10 Netgear ProSafe VPN Client not working at all or not well?

Here are the files on one of the Windows 10 systems that does not connect:

 

vpnconf.exe 6.1.2.1
tgbikeng.exe 6.4.1.1
comlib.dll 4.1.0.1
tgbstarter.exe 4.2.0.4

 

So, it looks rather the same as ones that do connect.... but not identical to the one reported above..

 

So, I got 6.12.001 and still have the same problem.

The process keeps repeating this (from the Console):

20150820 13:59:14:246 Default (SA Ikev1Gateway-P1) SEND phase 1 Aggressive Mode  [SA] [KEY_EXCH] [NONCE] [ID] [VID] [VID] [VID] [VID] [VID]

Message 10 of 14
Sophostry
Aspirant

Re: Windows 10 Netgear ProSafe VPN Client not working at all or not well?

I might try starting the client with admin priviledges.  I turned UAC off, so I never notice if that is the real cause of issues.

Message 11 of 14
fred339
Tutor

Re: Windows 10 Netgear ProSafe VPN Client not working at all or not well?

OK.  It appears that we finally have it working.

This is using an FVS336Gv2 and we updated the firmware to the latest.  Perhaps this was the key change.

 

The clients are 5.51.001

Service: "IKE and AuthIP IPSEC Keying Modules" is Disabled.

 

It worked fine for Windows 7 but Windows 10 required that we uninstall the client and reinstall it after the router firmware change.

Now it seems to be working for all the Windows 10 machines.

Message 12 of 14
fred339
Tutor

Wireless Power Output for Powerline Extender with WiFi

I recently installed a PLW1010 and found the WiFi power level to be rather low.  A laptop or a phone within 5 feet line of isght would only show 3 of 5 bars and my WiFi monitor would only indicate -50dB at the same distance.  I would have expected more like -30dB.

 

Is it a bad unit or is it a typical unit?  

Message 13 of 14
JohnC_V
NETGEAR Moderator

Re: Wireless Power Output for Powerline Extender with WiFi

@fred339,

 

Please create a new thread on this post as this one is too old.

Thank you!

 

Regards,

Message 14 of 14
Discussion stats
  • 13 replies
  • 10700 views
  • 1 kudo
  • 5 in conversation
Announcements