Showing ideas with label ORBI Pro.
Show all ideas
While aggregated traffic monitoring is a nice feature, I’d like to request device level monitoring. I have several devices connected and have a need to see which one(s) are using so much data. Thanks
... View more
See more ideas labeled with:
-
ORBI Pro
Please enable VLAN support and VLAN tagging on the SRK60 Orbi Pro systems. We need this feature to properly configure DHCP/DNS and Network Access.
... View more
See more ideas labeled with:
-
ORBI Pro
Will the Orbi Pro be getting vlan support? It seems a basic requirement for a business in a product that is offering multiple ssids, particularly for the guest wifi
... View more
See more ideas labeled with:
-
ORBI Pro
When you migrate to a new router or to mainiain your rules and document them properly an Export/import option of the list of the data is key.
... View more
See more ideas labeled with:
-
ORBI Pro
You quite often want to have a tempoary rule (VNC, RDP, ...) , that you activate just for a periode of time. or redirect tempoarly to a specific device the same port ( yes https ... quite often) This part need to be improved on a Pro device
... View more
See more ideas labeled with:
-
ORBI Pro
Orbi Pro AX1800 WiFi 6 Mini Router(SXR30), V3.2.33.108 Current limitation requires that the DMZ host be on LAN 1 (VLAN 1) instead of allowing us to use any of the configured LANs. Considering that LAN 1 is supposed to be your most secure network for your administrative users, it seems odd that if we need a DMZ host be open to the Internet that we also have to open it to our securest network... I'd like to be able to create a VLAN specifically for my DMZ host, associate it with a different LAN (eg, LAN 5), and then setup the WAN port to send traffic to the DMZ host.
... View more
See more ideas labeled with:
-
ORBI Pro
Submitted on
2018-01-30
10:55 PM
Submitted by
slowp0ke
on
2018-01-30
10:55 PM
Dear Netgear(community) As of right now VLAN is unfortunately not supported by the Orbi Pro. For two reason I think a device aimed at SMB's and marketed as PRO should offer this. 1) My Provider (TM Malaysia, Unify) requires VLAN Tagging on my WAN Port. e.g. vlan.500 for Internet PPPoE (other VLAN ID's for IPTV, etc. but that's irrelevant to me). Right now I am forced to use a managed switch as a workaround. A hassle I would like to avoid. 2) To my understanding right now my 3 Networks (Admin, Employee, and Guest) are isolated on MAC level. This is too much of an insecurity as a common address space is shared. Looking forward to you recognizing the necessity of upgrading your system to match requirements of the very SMB's you are currently marketing your device at.
To support that this is not just a request of relevance to myself, I would greatly appreciate if others affected by it would just hook on!
Best Regards Ben
... View more
See more ideas labeled with:
-
ORBI Pro
Need to add support for VLAN in access point mode
... View more
See more ideas labeled with:
-
ORBI Pro
Why won't you support net defender suite on Orbi Pro AC3000 series mesh wifi. It would help small businesses with Intrusion Prevention, Anti Virus etc.
... View more
See more ideas labeled with:
-
ORBI Pro
We were wondering if you all could change the firmware for the Orbi SXS80 satellites to where we could put in our own IP address for the satellites. I could not find SXS80 in the Model list. Thanks
... View more
See more ideas labeled with:
-
ORBI Pro
Please remove the requirement to use the https:// protocol for remote admin aonnectonis to the Orbi, given that there is no way to insall an SSL cert in a router. All this does is to force us to constatnly bypass the browser warnings about an insecure conneciton. Not sure how there could everr be a use for tthis in the first place and for some reason the Orbi Busienss model router seems to be one of the few that don't allow you to choose the prptocol even thouugh you would think the business model would have MORE features and ptions than the home model.
... View more
See more ideas labeled with:
-
ORBI Pro
Status:
New Idea
Submitted on
2021-03-14
05:32 AM
Submitted by
TheRyanRanch
on
2021-03-14
05:32 AM
Could you please add a simple “identify” button on the insight app that makes the satellite start blinking the LED light? When you are trying to figure out which satellite you are working on ?????
... View more
See more ideas labeled with:
-
Insight Mobile App
-
ORBI Pro
The Orbi Pro features one option for Wireless 2 (Employee Access Wireless Network):
[ ] Allow employees to see each other and access my local network.
This is a giant issue. I, along with many other users posting here would like to use Wireless 2 for a seperate private network for employees that has internet access, but we all need them to see each other and SEE PRINTERS BUT NOT INTERACT WITH OR SEE WIRELESS 1. This is such a simple network isolation feature and just about every other router can do this.
Please, PLEASE add one more checkbox to this so I can choose:
[ ] Allow employees to see each other on the Wireless 2 network.
[ ] Allow employees to access my full local network.
That way if I check option 1 employee clients or special guests on Wireless 2 can see and interact with clients on Wireless 2, including printers and are still seperate from clients on Wireless 1.
PLEASE FOR THE LOVE OF CODING, ADD THIS FEATURE!!!
Other Threads mentioning this exact issue which has not yet been addressed:
https://community.netgear.com/t5/Orbi-Pro-WiFi-for-Small-Business/Is-quot-Wireless-2-quot-Useless-fo...
... View more
See more ideas labeled with:
-
ORBI Pro
-
Wireless Controllers
Hi,
Seems there is no Qos settiings in Orbi Pro.
Just where you expect it to be used the most , in small buisness for priorisation of your own devices ,money transactions etc , above the guest network /devices etc.
... View more
See more ideas labeled with:
-
ORBI Pro
I have read on the other forums that with the Orbi Home, people have been able to register more than 3 orbi sattelites. We will need 4 at our small business. Does anyone know what will happen when I try and register the 4th satellite? All will be using ethernet backhaul. If this is not supported, Netgear really needs to allow more than 3 sattelites. Especially when they are all using ethernet backhaul.
... View more
See more ideas labeled with:
-
ORBI Pro
See more ideas labeled with:
-
ORBI Pro
I have observed that the daisy chain feature on the SRR60 still defaults to more of a star profile whenever possible even when stronger / faster signal strength options are available. Additionally, I find devices are also doing the same the thing. We really could use a fix in two ways for this. Firstly, when determining how to add a satellite to the network, the system should have some options for us. Either to use the strongest signal and connect to it, or to attempt to minimize the number of in between satellites to get back to the router. Additionally, it would be nice if we could hard code the path back to the router for each satellite based on the choice of satellites in range. In this way we can override your device logic if we see it not choosing the most optimum route. I have observed the behaviour in a straight line configuration between router and satellites. Have the router, which we will denote with R, and SRS60 satellites denoted by A,B,C, and D. My configuration is as follows: R A B C D What I observe is that: - A connects to R on a good signal strength - B connects to R on with a poor signal strength - C connects to B on a good signal strength - D connects to B on a poor signal strength. However, B is in range of A on a good signal strength and D is in range of C on a good signal strength. In fact when first setting up the system this is what they did, but after time they change and opt to use weaker signal options and there is no way to override this behaviour.
... View more
See more ideas labeled with:
-
ORBI Pro
SRR60 - Using the Guest band I am able to set a suitable duration limitations for our active Wifi for visitors. We have a need to set the time duration more incrementally. As it stands, the options are 1,2 and 6 hours. This is not suitable for my environment, and I'm sure many others. For my purposes we need options to limit access to 3, 4 or 5 hours. Could NetGear in its next software revision including all numbers 1 through 12 as choices for Guest login duration or perhaps even make the time manually configurable for up to 48 or 72 hours? I do see this adjustment as something which would Guest access limitations much more useful. Thanks
... View more
See more ideas labeled with:
-
ORBI Pro
We need to have the ability to assign SSIDs to VLANs for true buisness functionality.
... View more
See more ideas labeled with:
-
ORBI Pro
I would like to request a "Disable auto-firmware update" option/button be added to the Netgear Orbi Pro SRK 60 Business wi-fi system. As a system admin for a company that should be a standard option on any business networking equipment to avoid unexpected downtimes from a potentially buggy firmware update that auto installs on the router and takes down the network/internet connection. This a standard feature on almost all residential wi-fi systems and the 1st commericial or residential wireless router I have ever deployed that did not have that basic feature.
Thank you
... View more
See more ideas labeled with:
-
ORBI Pro