Showing ideas with label Smart Managed Plus Switch.
Show all ideas
Please release an updated firmware with TLS 1.2/1.3 support, and the option to disable 1.0 and 1.1.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Hi, I'm using a GS110TP switch with firmware 5.4.2.33. The HTTPs interface is enabled and working. The problem is that Firefox is now considering the GUI as unsecured because of TLS 1.0. There's no way to enable TLS 1.2 and it's a real security problem. Is it possible to get a new firmware with TLS 1.2 support ? Regards.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Please ensure NTGR does publish the Letter of Volatility (LOV) along with the product support download pages. We see that requests for LOV are taking reasonable bandwidth in the community support, temporary file downloads will be enabled with valid for a few days only. This makes the replies virtually useless, because the download is no longer available. So we see requests for the same product LOV again, or we get new posts. All this can be avoided...
Thank you for consideration!
Regards,
-Kurt
... View more
See more ideas labeled with:
-
Managed Switch
-
Smart Managed Plus Switch
-
Smart Switch
Submitted on
2016-07-20
02:19 AM
Submitted by
davemc50
on
2016-07-20
02:19 AM
When remotely accessing or managing a switch, it is not possible to tell which device is connected to which port.
When troubleshooting it is very useful to see which port a switch has learned a MAC address from.
Since switching is it's core function, knowing what information it is basing it's switching decisions on is enormously useful for tracing issues and performance monitoring
In any network of more than a few switches, or any lights-out facilities, MAC address tracing is an essential feature.
Display a simple table of MAC address, switch port source, age
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Submitted on
2016-06-30
01:26 AM
Submitted by
train_wreck
on
2016-06-30
01:26 AM
Got 2 requests that could improve the .1q VLAN features on the "Plus" switch line:
-Descriptions for VLANs - this would be super simple to add, I would think.
-InterVLAN routing - less simple
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Would be nice to have easier and better way for PoE Schedule on this switch. In firmware 1.0.1.6 there is slider that's not working so great, and you can set up only once per day turning on and off. Would be better to have more choice. I like how Ubiquiti has managed this. You can enter time manualy or use slider, and can enter unlimited number per each day. Hope to have this option on Multi-Gigabit Ethernet Plus Switch (MS108EUP) as well. Thanks
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
-
Smart Switch
As a homeowner and parent, I would like a date/time schedule feature on my Netgear GS308E managed switch, so that I can turn off certain Ethernet ports at night (for example).
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Status:
Comments Requested
Submitted on
2022-04-04
12:51 PM
Submitted by
EReese3
on
2022-04-04
12:51 PM
Need a replacement for the BR200 and BR500 and quickly! one location is maxed out on 1gb fiber and would like to go faster and have the site to site function actually work as orginaly advertised for the BR500. Also need the LAN ports to be be fiber
... View more
See more ideas labeled with:
Please allow SNMP monitoring on ports when these are changed to stacking uplink interface mode. Monitoring systems such as Zabbix, really any SNMP based monitoring, currently isn't able to notify when ports change operational status or contribute to bandwidth pattern analysis (eg identifying a faulty SFP+ or damaged cable). I initially logged this as a bug over two years ago, sad not to see this having been implemented yet, although I never did remember to request this... My original support query, where I was told that this would need to be a feature request: https://community.netgear.com/t5/Managed-Switches/Netgear-M4300-Spine-and-Leaf/m-p/1668669#M6906 PS: The 1 hour forum posting limit is *REALLY* annoying. Please consider possibly making the time penalty 10 minutes or only triggering after 5 posts.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Please add a page to auto display the MAC address of all the devices attached to the switch. By default, each port should be disabled, and I will enable it if I want to allow the attached device to access the network. It will be easier to set up ACL by Mac. No typing MAC addresses no rules to setup. Of course if you want to setup ACL by rules it should disable or override this page. But most network setups will really benefit from this simple way of controlling rogue devices and protecting unsupervised data ports. Consider that this feature will give Netgear and advantage over the competition. I will change all my network switches for those that have a feature like this.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Hello, I'm using IEEE 802.1x wired authentication on my switches, generally it's working ok, but a bit slow as the switch tries to authenticate to the RADIUS server and can't get an authentication, you'll get timeouts and retries and when all of this fails the guest VLAN will be assinged to the port. All good and well, but I also use PXE boot for installations and sometimes different bootmodes and the time it takes to get a connection with the VLAN exceeds the timeout of DHCP resulting in not connecting. I can do some finetuning limiting the timeouts and rerequest, also change the DHCP timeout a bit. In some cases this works, but it's a hassle, I've seen on HP switches that I use that they just assign the guest VLAN (or default VLAN) to the port while attempting the authentication giving a way more smoother experience. I would like to suggest to assign the guest VLAN first and then attempt an authentication, changing the VLAN if/when authentication is accepted. I found this to be the case in all NETGEAR switched that I used, not a particular range.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
-
Smart Switch
Hello NETGEAR, I really like my JGS524PE switch. Please add the possibility to view the MAC address table and the SNMP functionality to the Smart Managed Plus Switches (JGS524PE). Thanks in advance. Kind regards, Sven
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
The GSS108EPP is almost the perfect switch for my needs with Poe and LAG functionality. However connecting it to my older GS724Tv3 switch, I have had to set the LAG mode to Static mode as my latest switch the 108EPP does not have Dynamic / LACP functionality. However I can't connect to my Asus Router in the same way as that only accepts the more robust LACP method. Please can you advise if you are planning to add LACP mode for LAG setup to the GSS108EPP? I am sure many would find this useful and allow much better compatibility with other devices.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
-
Smart Switch
The IGMP Snooping Static Router Port setting on GS105PE was originally not available on that model, but it was later added after a request to add it and was provided by updating the firmware. Our engineers will now review if it will be possible to add it on the GS108PEv3 and we need to log it as a request however we will not be able provide you an estimated time of release. We will have to wait and see it on the future firmware update of the product.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Submitted on
2017-04-16
02:56 AM
Submitted by
Mister_Twister
on
2017-04-16
02:56 AM
See more ideas labeled with:
-
Smart Managed Plus Switch
Submitted on
2016-09-18
03:39 PM
Submitted by
Midaz
on
2016-09-18
03:39 PM
Hello my name is Peter and I posted some requests about essential functions on the GS1xxE series of switches.
It seems there have been some ideas posted here but there is no respons whether these things are being
implemented or not or any timeframe given.
I personally had a request about adding a menu in the GS1XXE switches to enter some allowed mac addresses to prevent
a user to connect some rogue equipment on the network.
Could it be that the chipset does not support such functionality!
Couldn't you post back that the engineers are working with this, this and this function and it will be ready in 1-3 months or something.
Anyways a definitive answer would be appreciated so that I may peruse other brands that has similar 5-port switches.
Regards
Peter
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Submitted on
2016-04-11
11:23 AM
Submitted by
name29
on
2016-04-11
11:23 AM
Dear Netgear,
Can you add the possibility to set a port descrition inside the switch?
Thank you
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Status:
New Idea
Submitted on
2024-02-04
03:40 AM
Submitted by
Dimitri_vanes
on
2024-02-04
03:40 AM
The fan speed is fixed to 4000 RPM, can this be changed to smart as the switch is not installed in a server cabinet. the tempeture is als stable. i think it should ajust itself according toe what the switch needs for cooling. I would like to know if this is possible.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Status:
New Idea
Submitted on
2022-10-25
05:17 AM
Submitted by
classicsound
on
2022-10-25
05:17 AM
Hello, I am just starting to work with the AV Line switches. I use them in a concert hall. There is an administrator and many users running the shows. For this, from my point of view, there needs to be some kind of user management. On the one hand, of course, the administrator with full access, but on the other hand, another account for status monitoring and assigning ports to VLANs, if that is necessary for a show. A user management with rights management would be perfect for this. Is such a feature already planned?
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
It is absurd that the GS110EMX does not support https. How can this be? It’s irresponsible to have any device not support https. Please add https support to the GS110EMX. I do not want to send my device password in plaintext across my network!
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch