Showing ideas with label Smart Managed Plus Switch.
Show all ideas
Status:
New Idea
Submitted on
2024-02-04
03:40 AM
Submitted by
Dimitri_vanes
on
2024-02-04
03:40 AM
The fan speed is fixed to 4000 RPM, can this be changed to smart as the switch is not installed in a server cabinet. the tempeture is als stable. i think it should ajust itself according toe what the switch needs for cooling. I would like to know if this is possible.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Status:
New Idea
Submitted on
2023-06-07
08:09 AM
Submitted by
UltimateInterne
on
2023-06-07
08:09 AM
You have 2 device compatibilities so far, please add M4300 8x-8f (XSM4316S) to the S3300/M4300 firmware pair! https://kb.netgear.com/000049533/Smart-M4300-S3300-Stacking-Notes-and-Restrictions?article=000049533 The link above provides context to the question and idea. Thanks!
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Ability to have dedicated VLAN for management for GS105Ev2, GS108PEv3 and GS116Ev2 switches. The GS108T has "Management VLAN" setting in it.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Hello, Would it be possible to add LLDP support in the firmware for 300 Series Plus Switch (GS316EPP) and other models in this serie? The tabletop form factor and high poe-budget makes these switch ideal for me. However I am having trouble with IP phones and AP's that require poe+. My devices check the switch poe/poe+ capability bij LLDP. Now I have to set the poe-settings of my devices manually which is time consuming. Sincerely, Jozef
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
I've just added a GS108Ev3 to my network with existing GS116Ev2 and GS105Ev2. I am very disappointed to see that the 108 does not support a port description field which is present in the 116 and 105. Can this be added please? GS108Ev3 Firmware V2.06.17GR see also https://community.netgear.com/t5/Idea-Exchange-For-Business/Add-Port-descripton-to-GS105Ev2-in-GS116Ev2-it-is-present/idi-p/2009767
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Hello Netgear engineers, Could you please consider 2 things about firmware KB pages (I'm interested in M4300s but this is general request): 1. Clearly mention Firmware release date, because we cannot rely on Article last modified date. As an example, firmware 12.0.17.10 is having an older date https://kb.netgear.com/000065410/M4300-Firmware-Version-12-0-17-10 than for an older firmware 12.0.17.9 https://kb.netgear.com/000065245/M4300-Firmware-Version-12-0-17-9 or even 12.0.17.7. Time elapsed between 2 firmware release is an indication of whether the firmware seems stable or not. 2. What is the best recommended firmware to use in a series (such as M4300) for Production usage. The latest firmware 3 weeks ago is most probably not the recommended one, and we're kind of lost when seeing 4 firmwares released in a quarter (most probably. can't be sure as no creation date is mentionned), mixing both bug fixes and new features in same time (classically bringing new bugs) FYI, I've raised support ticket 46843940 for the same, been advised to publish here as having also for publicity. Thanks. Regards, Olivier
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
-
Smart Switch
Would be nice to have easier and better way for PoE Schedule on this switch. In firmware 1.0.1.6 there is slider that's not working so great, and you can set up only once per day turning on and off. Would be better to have more choice. I like how Ubiquiti has managed this. You can enter time manualy or use slider, and can enter unlimited number per each day. Hope to have this option on Multi-Gigabit Ethernet Plus Switch (MS108EUP) as well. Thanks
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
-
Smart Switch
Please allow for temperature alerts and also custom temperature alerts for Netgear switches. I'd like to be able to have a temperature alert sent to the IT team of an overheating switch while also having an automated email sent to the site manager for their awareness. This feature would be great for Insight-managed switches or any switch for that matter. Temperature alerts are critical and can be a business stopper.
... View more
See more ideas labeled with:
-
Insight Switch
-
Managed Switch
-
Smart Managed Plus Switch
-
Smart Switch
As a homeowner and parent, I would like a date/time schedule feature on my Netgear GS308E managed switch, so that I can turn off certain Ethernet ports at night (for example).
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Status:
New Idea
Submitted on
2022-10-25
05:17 AM
Submitted by
classicsound
on
2022-10-25
05:17 AM
Hello, I am just starting to work with the AV Line switches. I use them in a concert hall. There is an administrator and many users running the shows. For this, from my point of view, there needs to be some kind of user management. On the one hand, of course, the administrator with full access, but on the other hand, another account for status monitoring and assigning ports to VLANs, if that is necessary for a show. A user management with rights management would be perfect for this. Is such a feature already planned?
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Currently, you can allow all VLAN's on a switch trunk port using basic 802.1Q mode. In this mode you cannot set a PVID or native vlan on the switch port, and any untagged traffic falls into an unconfigurable dead-end VLAN 4094. In advanced 802.1Q mode, you can set a PVID, or native VLAN on a trunk port, however to allow all VLAN's you have to configure each VLAN manually - up to a limit of 64. Most vendors have an option to setup a trunk port to allow ALL VLANs, while setting a native VLAN on the port. Use Case 1: Scalability. You can deploy several switches in a network, and not have to manually add VLAN's to every switch when additional subnets are created. Use Case 2: Troubleshooting tool or network tap. You can insert this switch between a PoE device and an existing switch, and mirror the bi-directional traffic to a monitor port while maintaining the uplink to the existing switch. Good when you don't know what VLAN's are in use on the existing equipment.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
It is absurd that the GS110EMX does not support https. How can this be? It’s irresponsible to have any device not support https. Please add https support to the GS110EMX. I do not want to send my device password in plaintext across my network!
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
add VLAN Management possibility in GS308E and GS305E add possibility to change VLAN Management to switch GS308E and GS305E thank you
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Hello, For this small PoE Switch, it would be good to provide the following possibilities: -To be able to configure the fixed speed of a port at 1000 Mbit/s this choice of speed is currently not possible. -To be able to specify the VLAN of the administration interface of the Switch. -In the PoE --> "Power Cycle Ports" section, only the ports delivering power should be displayed instead of all the ports. -It would be nice to have the ARP/Mac Table displayed in the web interface. With best regards.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
I own an XS724EM 24-port 10G switch. It runs warm to the touch, and the default fan profile seems to err on the side of low noise rather than cooling. Tech support says that the switch is designed to spin down fans entirely unless a certain temperature threshold is reached. Personally, I would prefer to see more aggressive cooling, even if meant slightly more fan noise. So my feature request is twofold: Basic temperature monitoring (ambient, internal) in the admin GUI. All I want is a simple readout of how warm the switch currently thinks it is. Basic manual fan control in the admin GUI. I'm envisioning something like the "Cool/Balanced/Quiet" drop-down menu (see image) found on ReadyNAS units. I know the managed switches have functionality along these lines. To me, this basic temperature monitoring and control seems like it should definitely be included on Smart/Plus switches too.
... View more
See more ideas labeled with:
-
Insight Switch
-
Smart Managed Plus Switch
-
Smart Switch
Status:
Comments Requested
Submitted on
2022-04-04
12:51 PM
Submitted by
EReese3
on
2022-04-04
12:51 PM
Need a replacement for the BR200 and BR500 and quickly! one location is maxed out on 1gb fiber and would like to go faster and have the site to site function actually work as orginaly advertised for the BR500. Also need the LAN ports to be be fiber
... View more
See more ideas labeled with:
we all love mac protection... (yes we do!) but we all are a bit lazy: normally we want to say: please add one first seen mac as static protection mac. using the webinterface we can say 1 static 1 dynamic but... what does it mean? what we normally want is that new MAC addresses are learned until the limit is reached. means: learn until 2 macs, if 3 then trap/disable. all macs should become static. also there should be an option if mac protection should be automatically enabled if static. means no other port is allowed to spoof this mac if once locked down, and maybe ip to mac to port lock, too
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Please add an Ethernet Printserver with Scan/Fax etc. mfp support. Many printers use insecure outdated firmwares, so printers should be seperated from workstations. workstations may print to the printserver inside the switch which forwards everything on line speed directly to printer. maybe switch can do some port/mac/etc based authentification if printer access is allowed.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
It is nice to have a RADIUS Server on the net. but it is not nice for SMB. if you want to use this server for VPN Access, you cant update and restart your primary machine if this machine is the only RADIUS server (which is common), so the switch is normally not restartet and if, all network connections are dropped. so it would be good if the switch includes a small radius server for TOTP VPN Auth where the VPN Access Concentrator can ask for XAUTH TOTP or sth else. Also there should be a list of OTP who can be printed out like a PAPER TAN LIST. where you can print 1 A4/letter sheet and use it as one time authentifcation password. this is good for traveling etc if no TOTP application is there or smartphone is lost. also this function could be used for WIFI Guest access. also you should add tacacs, kerberos etc, too. but thats not that import. maybe you can add some accounting stuff.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
It is a nice feature, that flooded/storm/looped ports may become disabled. but in all cases they should be reenabled after some time. there should be an option to auto reenable a port with this error after n minutes. say loop 1 minutes disabled, flood 5 minutes disabled. after this time it should have some retries like 3-5 retries. if condition still occurs it should automatically scale the time to 50, 500, 5000 minutes or sth else. so problems could be resolved without admin access. this should be OPTIONAL per feature.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch