Showing ideas with label Smart Managed Plus Switch.
Show all ideas
Please add an Question "Are you sure?" to the WebInterface Save-Button. Otherwise the "Exit/Logout" Button is far to near to Save. Also add a return to startup config button and add a diff config button
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
if you dig a bit deeper in CLI you see that there is an application support. but thich applications? is there an API? how can i add sth. myself? Please provide Information
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Hi i log in as "admin" i want to be in "enabled" or "config" context directly. it is common to use operator or manager user accounts for this task. actually i have to type too much.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
As common Task you should be able to manage Files of the Switch using SCP/SFTP (e.g. WinSCP) to Up-/Download Configs and Firmware Images as HP allows.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
I have to post all under Smart Managed Plus Switch instead of Managed Switch. Please fix..
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Currently the Device Shows Disabled Ports Red in Device View and enabled Ports not. There should be some more colors for: Admin-Disabled Ports (not red, as it is no error, maybe greyed out or / like on HP) D-Disabled Ports (red on MAC/Flood Protection and orange if temporary disabled) or sth. similiar
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Currently i can set a Port Description. This is a nice feature, but it is quite useless, if it is not shown next to DropDown-Boxes or Tables who include Ports. Yes, Table would be too bug, but let the user decide, if this option is important for him. Otherwise i have to Printout this Table and check it on Paper... Btw: Add an Printer-Friendly Print-Out Option for Portnames and/or Settings.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
The GS105E v2 (5 port) and GS116E v2 (16 port) switches have the ability to disable Energy Efficient Ethernet (IEEE 802.3az) in the web interface via: System > Management > Power Saving Mode, Enable/Disable This option is missing from the GS108E v3 (8 port) switch. Can this be addressed in a future firmware update?
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Hi, For XS724EM current 1.0.1.3 firmware, the port speed options only have "Auto", "Disable" and "100M Full", Is there any way we can set the port speed to specific speed other than 100M? For example, I would like to have port speed that can be force to "10G full", "5G full" and "2.5G full". Thank you.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Please allow SNMP monitoring on ports when these are changed to stacking uplink interface mode. Monitoring systems such as Zabbix, really any SNMP based monitoring, currently isn't able to notify when ports change operational status or contribute to bandwidth pattern analysis (eg identifying a faulty SFP+ or damaged cable). I initially logged this as a bug over two years ago, sad not to see this having been implemented yet, although I never did remember to request this... My original support query, where I was told that this would need to be a feature request: https://community.netgear.com/t5/Managed-Switches/Netgear-M4300-Spine-and-Leaf/m-p/1668669#M6906 PS: The 1 hour forum posting limit is *REALLY* annoying. Please consider possibly making the time penalty 10 minutes or only triggering after 5 posts.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
The ProSAFE Plus Configuration Utility, which no longer will load on my Win10 machine and is also eol, had a "refresh IP address" feature that would trigger DCHP refresh in case the switch was on the wrong subnet. When I found that the ProSAFE Plus Configuration Utility v2.7.8, newly installed, would not run on my Win10 machine, I ran its apparent successor, the Netgear Switch Discovery tool v1.2.103. It has a nicer UI, and I get that you're trying to move users to the switch's web GUI for most functions. But there's a bootstrapping problem. My switch was on the wrong subnet, and the Discovery utility has no feature for triggering DHCP refresh that I could find. I had to manually trigger DHCP refresh by powering down/up the switch. So, please add a DHCP IP address refresh to the Discovery utility.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Please add a page to auto display the MAC address of all the devices attached to the switch. By default, each port should be disabled, and I will enable it if I want to allow the attached device to access the network. It will be easier to set up ACL by Mac. No typing MAC addresses no rules to setup. Of course if you want to setup ACL by rules it should disable or override this page. But most network setups will really benefit from this simple way of controlling rogue devices and protecting unsupervised data ports. Consider that this feature will give Netgear and advantage over the competition. I will change all my network switches for those that have a feature like this.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
It is a very unsafe design to have the switch listen to every VLAN that's configured as untagged in one of its physical ports for its web management. It would be a relatively simple change to add a specific vlan to listen to for management, regardless of whether a port is marked untagged for this vlan or not. See: https://community.netgear.com/t5/Smart-Plus-and-Smart-Pro-Managed/GS108Ev3-Cannot-set-VLAN-for-management-interface/td-p/971240 Please change this
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Status:
New Idea
Submitted on
2020-12-27
11:19 PM
Submitted by
nismo9132_net
on
2020-12-27
11:19 PM
I purchased both a GS305E and two GS308E switches and really like the performance and configuration functionality, but it's missing a key feature -a Configurable Management VLAN. Please add this feature because otherwise I'm likely going to return these switches to get something that supports them from another vendor for the same price point.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
Hello, I'm using IEEE 802.1x wired authentication on my switches, generally it's working ok, but a bit slow as the switch tries to authenticate to the RADIUS server and can't get an authentication, you'll get timeouts and retries and when all of this fails the guest VLAN will be assinged to the port. All good and well, but I also use PXE boot for installations and sometimes different bootmodes and the time it takes to get a connection with the VLAN exceeds the timeout of DHCP resulting in not connecting. I can do some finetuning limiting the timeouts and rerequest, also change the DHCP timeout a bit. In some cases this works, but it's a hassle, I've seen on HP switches that I use that they just assign the guest VLAN (or default VLAN) to the port while attempting the authentication giving a way more smoother experience. I would like to suggest to assign the guest VLAN first and then attempt an authentication, changing the VLAN if/when authentication is accepted. I found this to be the case in all NETGEAR switched that I used, not a particular range.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
-
Smart Switch
Please release an updated firmware with TLS 1.2/1.3 support, and the option to disable 1.0 and 1.1.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
I've just added a GS105Ev2 to my network, to add to an existing GS116Ev2. I am very disappointed to see that the 105 does not support a port description field which is present in the 116. Can this not be added? GS105Ev2 Firmware V1.6.0.6
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
You should not advertise a product as a 'Smart' switch when you do not provide the most basic and rudimentary functions that people are used to on a smart switch. Showing the MAC addresses connected to the switch is a level 1, basic verification and troubleshooting technique. This is my first use of Netgear switches and I am incredibly disappointed and surprised that you would not provide a way to see which MAC addresses are connected to the switch. All your competition do this with their smart switches (TP-Link) - Cisco etc. Please add this feature to the Smart Managed Plus series as you do with the Smart Managed Pro series. I just found out the difference with your support. Thanks.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
The data sheet on these switches indicate that link aggrigation is available on 16 port and larger. This seems to be the only features excluded on the GS308E. I would like to see this included as a feature in a furture firmare. Thanks.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
I would suggest you add the ability to name a port on all your managed switches. I have a few of your Prosafe Plus switches and it would have been really helpful to have to be able to give them a name. Thanks
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch