Showing ideas with label Smart Switch.
Show all ideas
Given that your entire product line of ProSafe Smart switches only supports up to TLS 1.0, I'd like to suggest that you start working on making TLS 1.3 available. Especially, since TLS 1.2 has been around since 2008 and you should really be embarassed that your business line of switches only support insecure communication methods.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
-
Smart Switch
Status:
New Idea
Submitted on
2023-10-11
01:02 AM
Submitted by
Raphael-Maria
on
2023-10-11
01:02 AM
Summer Time Configuration improve the description of the fields to be "Offset Minutes" instead of just "Offset" because this is misleading as one assumes "Hours" (as it is in "Time Configuration") also slightly better "Time Zone Name" instead of just "Zone" (as it is in "Time Configuration")
... View more
See more ideas labeled with:
-
Smart Switch
I own an XS724EM 24-port 10G switch. It runs warm to the touch, and the default fan profile seems to err on the side of low noise rather than cooling. Tech support says that the switch is designed to spin down fans entirely unless a certain temperature threshold is reached. Personally, I would prefer to see more aggressive cooling, even if meant slightly more fan noise. So my feature request is twofold: Basic temperature monitoring (ambient, internal) in the admin GUI. All I want is a simple readout of how warm the switch currently thinks it is. Basic manual fan control in the admin GUI. I'm envisioning something like the "Cool/Balanced/Quiet" drop-down menu (see image) found on ReadyNAS units. I know the managed switches have functionality along these lines. To me, this basic temperature monitoring and control seems like it should definitely be included on Smart/Plus switches too.
... View more
See more ideas labeled with:
-
Insight Switch
-
Smart Managed Plus Switch
-
Smart Switch
Would be nice to have easier and better way for PoE Schedule on this switch. In firmware 1.0.1.6 there is slider that's not working so great, and you can set up only once per day turning on and off. Would be better to have more choice. I like how Ubiquiti has managed this. You can enter time manualy or use slider, and can enter unlimited number per each day. Hope to have this option on Multi-Gigabit Ethernet Plus Switch (MS108EUP) as well. Thanks
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
-
Smart Switch
GS108T/v2 supports TLS/1.0, which is very weak. Please upgrade support to TLS/1.2 (or 1.3)
... View more
See more ideas labeled with:
-
Smart Switch
Problem statement: GS324T deactivates the port due to suspected DDoS, but most likely it is a false positive - tuning is not really possible due to the missing information (in the log) about the reason(s). The Switch log shows only one line: <11> Apr 11 04:55:29 Main Home Switch-1 DOS[dtlTask]: dos_api.c(1928) 2115 %% ERR Interface g12 has been shutdown by DOS attack notification. Based on the reply on my post in the forum here, it looks like there is no possibility to have more information in the log, and identify the real reasons, what exactly has triggered the port deactivation. Hence, there is no possibility to "tune" the DDOS settings and avoid the "False Positive". In other words: only "blind" tuning possible. Ask: To have the possibility to get more details about DDoS to the log e.g. by having different log level for DDoS, up to the additional information what exactly / what "active" parameter in DDoS settings has triggered the port deactivation. Thanks, Andrey
... View more
See more ideas labeled with:
-
Smart Switch
Any chance that LAG will be available on the GS308E in future firmware updates?
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
-
Smart Switch
Status:
Implemented In Latest Product
Submitted on
2021-02-15
03:25 PM
Submitted by
JM520
on
2021-02-15
03:25 PM
When I bought this business class mesh system about a year back (1 router and 2 satellites), tech support stated that the product being a business producr does not have a built in firewall and I should procure an external firewall. A year back tech support stated that vlan segmentation and vlan to ssid mapping would be coming in a later release. At this point indeed the feature came in a later release of hardware in AX6000. I was talking to tech support today again as I purchased a decent hardware firewall and I would like to have the same vlan feature Iin the AX6000) of vlan 1,10,20 and 30 married to SSID with trunking available on the AC3000 as this should be basic network fiormware/software update and has nothing to do with wifi6 which may demand a new chipset. In the very least I need to segment the IOT stuff from business traffic. Can you please integrate proper vlan/ssid mapping into the AC3000 (SRR60). The way this should work is a user joins SSID Wireless 1 and should be part of the corresponding VLAN/Subnet and the AC3000 would run in AP mode and trunk (80-2.1q) the vlans via the WAN port to the Firewall which provides the IP routing, dhcp and all other services. I am not looking for wifi-6.
... View more
See more ideas labeled with:
-
ORBI Pro
-
Smart Switch
Status:
Comments Requested
Submitted on
2022-04-04
12:51 PM
Submitted by
EReese3
on
2022-04-04
12:51 PM
Need a replacement for the BR200 and BR500 and quickly! one location is maxed out on 1gb fiber and would like to go faster and have the site to site function actually work as orginaly advertised for the BR500. Also need the LAN ports to be be fiber
... View more
See more ideas labeled with:
Status:
New Idea
Submitted on
2021-02-22
01:37 PM
Submitted by
IrishCornelius
on
2021-02-22
01:37 PM
Please add support for TLS 1.2 to GS108Tv2 switch range. Currently only TLS 1.0 is supported on firmware 5.4.2.35. TLS 1.0 is considered deprecated by IETF: https://tools.ietf.org/html/draft-ietf-tls-oldversions-deprecate-12 <extract> 4. Do Not Use TLSv1.0 TLSv1.0 MUST NOT be used. Negotiation of TLSv1.0 from any version of TLS MUST NOT be permitted. Any other version of TLS is more secure than TLSv1.0. TLSv1.0 can be configured to prevent interception, though using the highest version available is preferable. Pragmatically, clients MUST NOT send a ClientHello with ClientHello.client_version set to {03,01}. Similarly, servers MUST NOT send a ServerHello with ServerHello.server_version set to {03,01}. Any party receiving a Hello message with the protocol version set to {03,01} MUST respond with a "protocol_version" alert message and close the connection. Historically, TLS specifications were not clear on what the record layer version number (TLSPlaintext.version) could contain when sending ClientHello. Appendix E of [RFC5246] notes that TLSPlaintext.version could be selected to maximize interoperability, though no definitive value is identified as ideal. That guidance is still applicable; therefore, TLS servers MUST accept any value {03,XX} (including {03,00}) as the record layer version number for ClientHello, but they MUST NOT negotiate TLSv1.0. </extract>
... View more
See more ideas labeled with:
-
Smart Switch
The GS110TP supports only a max SSL key length of 2048 bits. This is a real problem for modern PKI infrastructures where - at least - the CAs almost always use a 4096 bit key length.
Given that the GS110TP is still sold today I hope hat this could be corrected in a (near) future firmware update.
... View more
See more ideas labeled with:
-
Smart Switch
Many NTGR business products still have SSL 2.0 and 3.0 and TLS 1.0 as options - nowadays these are obsolete and should be removed, TLS 1.2 is in the field for more then 10 years, so there should be no more prehistorical Web browser still requiring anything different.
... View more
See more ideas labeled with:
-
Insight Switch
-
Nighthawk Switch
-
Smart Managed Plus Switch
-
Smart Switch
Hello, I'm using IEEE 802.1x wired authentication on my switches, generally it's working ok, but a bit slow as the switch tries to authenticate to the RADIUS server and can't get an authentication, you'll get timeouts and retries and when all of this fails the guest VLAN will be assinged to the port. All good and well, but I also use PXE boot for installations and sometimes different bootmodes and the time it takes to get a connection with the VLAN exceeds the timeout of DHCP resulting in not connecting. I can do some finetuning limiting the timeouts and rerequest, also change the DHCP timeout a bit. In some cases this works, but it's a hassle, I've seen on HP switches that I use that they just assign the guest VLAN (or default VLAN) to the port while attempting the authentication giving a way more smoother experience. I would like to suggest to assign the guest VLAN first and then attempt an authentication, changing the VLAN if/when authentication is accepted. I found this to be the case in all NETGEAR switched that I used, not a particular range.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
-
Smart Switch
fallsfal It appears no longer possible to configure ReadyNas to use Backblaze Amazon s3 backup per https://help.backblaze.com/hc/en-us/articles/1260804505130-How-to-use-Netgear-ReadyNAS-with-Backblaze-B2, I suspect that direct use of Amazon S3 fails as well but haven't tested that. I received this response from Backblaze support: The requirement for V4 signatures is indeed a part of the S3 compatible API. The older versions have been deprecated and as a result, we have stopped supporting them. Unfortunately, I am not able to troubleshoot their device and it's utilities. I would recommend reaching out to their support to see if there is a way to update or alter the signature they are using. Apologies for not being able to be more help there.
... View more
See more ideas labeled with:
-
Smart Switch
Please, enable VLAN Management option on GS108Ev3 switches. This is a required security feature that will not change the CPU loading. Currently it only allow to change the switch IP address on VLAN 1. Thank you!
... View more
See more ideas labeled with:
-
Smart Switch
The GSS108EPP is almost the perfect switch for my needs with Poe and LAG functionality. However connecting it to my older GS724Tv3 switch, I have had to set the LAG mode to Static mode as my latest switch the 108EPP does not have Dynamic / LACP functionality. However I can't connect to my Asus Router in the same way as that only accepts the more robust LACP method. Please can you advise if you are planning to add LACP mode for LAG setup to the GSS108EPP? I am sure many would find this useful and allow much better compatibility with other devices.
... View more
See more ideas labeled with:
-
Smart Managed Plus Switch
-
Smart Switch
JGS524Ev2 I am using this in a house but in the Utility I should be able to add in a descriptive field to the ports so I know the location mapping of the ports to areas in the house without having to look at them from a piece of paper, or my failing memory. Simple solutions, significant impact to understanding the utility functionaility.
... View more
See more ideas labeled with:
-
Smart Switch
Submitted on
2017-04-26
05:08 PM
Submitted by
Napsterbater
on
2017-04-26
05:08 PM
The "workaround" about doing it at port level is not 100%, seems alot of Multicast stream are missed and not reported in the switch in that config. When setup at the VLAN level it works 100% like its suposed to for IPv4, but ofcourse that breaks IPv6.
This needs to be addressed, and apprently its on this whole "family" of switches based on other post here.
EDIT: and this is with the latest firmware of 6.3.1.16
... View more
See more ideas labeled with:
-
Smart Switch
Please ensure NTGR does publish the Letter of Volatility (LOV) along with the product support download pages. We see that requests for LOV are taking reasonable bandwidth in the community support, temporary file downloads will be enabled with valid for a few days only. This makes the replies virtually useless, because the download is no longer available. So we see requests for the same product LOV again, or we get new posts. All this can be avoided...
Thank you for consideration!
Regards,
-Kurt
... View more
See more ideas labeled with:
-
Managed Switch
-
Smart Managed Plus Switch
-
Smart Switch
I and everyone else in the community would appreciate our device view being repaired for our smart switches in service. I want to but more switches for my network, including some 10gbe switches. But I don't want to buy more switches where all the features don't work. This Device View Java isssue has been ongoing since 2015 from reading the community website. In my opinion trashing all our switches and buying all new switches to fix a firware issue is a ridiculous option. Please give your customers some quality customer service and produce a firmware update to correct this problem...
... View more
See more ideas labeled with:
-
Smart Switch