× NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Orbi WiFi 7 RBE973
Reply

Re: Wifi on VLAN GC728X

JohndB
Initiate

Wifi on VLAN GC728X

Hi There,
I have a customer with an GC728X switch.
There are two network configured on a Ubiquty Wifi AP and an Ubiquty gateway.
192.168.1.x for the business LAN and wifi

200.254.254.x for a wifi guest network with VLAN ID 20

The wifi ap is connected to port 13

I've made all the ports a member of VLAN ID 20 and VLAN ID 1. I can connect to the wifi guest network but do not receive an IP Address.
Can some please tell me how to configure this?


Thanks in advance!
Best regards,
John

 

 

Model: GC728X| Insight Managed 28-port Smart Cloud Switches
Message 1 of 3

Accepted Solutions
JohnC_V
NETGEAR Moderator

Re: Wifi on VLAN GC728X

Hi JohndB,

 

Welcome to our community! 🙂

 

You may need to assign the ports as T or Tagged going to the router and to your AP so that it can passthrough the VLAN in your switch. Please make sure that every VLAN aware devices was set to Tagged. 

 

e.g.

GC728X

Port 1 - Ubiquity Gateway

Port 13 - Wifi AP

 

VLAN 1

Port 1 - T - PVID 1

Port 13 - T - PVID 1

 

VLAN 20

Port 1 - T - PVID 1

Port 13 - T - PVID 1

 

Then try to do ipconfig/renew and let's see if it will now provide an IP.

 

Regards,

View solution in original post

Message 2 of 3

All Replies
JohnC_V
NETGEAR Moderator

Re: Wifi on VLAN GC728X

Hi JohndB,

 

Welcome to our community! 🙂

 

You may need to assign the ports as T or Tagged going to the router and to your AP so that it can passthrough the VLAN in your switch. Please make sure that every VLAN aware devices was set to Tagged. 

 

e.g.

GC728X

Port 1 - Ubiquity Gateway

Port 13 - Wifi AP

 

VLAN 1

Port 1 - T - PVID 1

Port 13 - T - PVID 1

 

VLAN 20

Port 1 - T - PVID 1

Port 13 - T - PVID 1

 

Then try to do ipconfig/renew and let's see if it will now provide an IP.

 

Regards,

Message 2 of 3
JohndB
Initiate

Re: Wifi on VLAN GC728X

Thanks JohnCarloV,

It's solved now and I've learned someting 😉

 

Best regards,

 

John

Message 3 of 3
Discussion stats
  • 2 replies
  • 3374 views
  • 2 kudos
  • 2 in conversation
Announcements