XSM4348FS stack -link shows as offline

[anvis]

Hi,

I have a stack of two XSM4348FS-100NES, I configured ports 45,46, and 47 as stack ports. 

The link is not showing when I am connecting port 45 of both switches using  SFP AGM732F-R and 2 meter SM patch cord. port 47 I am connecting using cat 6 cables, which is coming up .Do I need to use a DAC cable or any other issue?

 #show stack-port

Configured Running
Stack Stack Link Link
Unit Interface Type Product Name Mode Mode Status Speed (Gb/s)
---- ---------------- ------- ----------------- ---------- ---------- ---------- ------------
1 0/45 SFP AGM732F-R Stack Stack Link Down 10
1 0/46 Stack Stack Link Down 10
1 0/47 Stack Stack Link Up 10
2 0/45 SFP AGM732F-R Stack Stack Link Down 10
2 0/46 Stack Stack Link Down 10
2 0/47 Stack Stack Link Up 10

show switch

Management Standby Preconfig Plugged-in Switch Code MAC
SW Switch Status Model ID Model ID Status Version Address
--- ----------- --------- ---------------- ---------------- ------------- ----------- -------------------
1 Mgmt Sw M4300-48XF M4300-48XF OK 12.0.17.9 8C:3B:AD:72:2A:B4
2 Stack Mbr Oper Stby M4300-48XF M4300-48XF OK 12.0.17.9 8C:3B:AD:72:2B:7C

[schumaku]

The connection ports are configured as stack ports or general data ports?

[anvis]

Hi,
Thanks for the reply.

Both ports are configured as stack ports .

I tried with two MM 10G transceivers and link is coming up .
Thank You