Reply
Occasional Contributor
Posts: 9
Registered: ‎2009-10-20

Transmission 2.42 on readynas : OK

Hi,

perhaps some of you try to build the last release of transmission on readynas NV+ (sparc).

it is possible ! :roll:
The web interface is more faster.

Firmware readynas : 4.1.8
previous addon : transmission 2.33 from super-poussin

prerequisites :
update libevent to 2.0.15
update intltool to 0.35


add :
/etc/profile
LD_LIBRARY_PATH="/usr/local/lib"
export LD_LIBRARY_PATH

LIBEVENT_LIBS="-L/usr/local/lib -levent"
export LIBEVENT_LIBS


command line to build transmission :
./configure --build=sparc-linux target=sparc-linux --disable-nls
make –s
make install
Occasional Contributor
Posts: 19
Registered: ‎2008-11-01

Re: Transmission 2.42 on readynas : OK

Hello,

Can you make a add-on file for this one? A lot of people going to be very happy for a file for this one Smiley Happy

Regards
Occasional Contributor
Posts: 9
Registered: ‎2009-10-20

Re: Transmission 2.42 on readynas : OK

sorry,

I didn't know how do that. And I searched many days to build it due to dependance libevent and intltool.

I think the member "super-poussin" is the best man to built a secure add-on.
Occasional Contributor
Posts: 8
Registered: ‎2006-11-27

Re: Transmission 2.42 on readynas : OK

Can you please be a bit less cryptic?
How to make the updates? Using wget? To which urls?
The additional code should be added at the end of the profile file?

Thanks
Occasional Contributor
Posts: 9
Registered: ‎2009-10-20

Re: Transmission 2.42 on readynas : OK

Can you please be a bit less cryptic?
=> not understood.
How to make the updates? Using wget? To which urls?
=> make for libevent ( libevent-2.0.15-stable )
=> debian package for intltool (dpkg -i intltool-debian_0.35.0+20060710.1_all.deb, and replace binary extracted from /usr/local/share to /usr/bin)
The additional code should be added at the end of the profile file?
=> yes

1/
And don't forget before start :
Make a backup of transmission folder (/addons-config), libevent binary (/usr/lib) and intltool (/usr/bin).

2/
Here a copy of my folders needed to build transmission :
http://dl.free.fr/e1DRUWV3C
(all binary are already available due the "make" and "configure" from these folders)
from 4.1.8 firmware, sparc platforms and transmission package 2.33,
intltool = (dpkg -i intltool-debian_0.35.0+20060710.1_all.deb, and replace binary extracted from /usr/local/share to /usr/bin)
libevent = (execute in command line just a "make install" from libevent)
transmission = (execute in command line just a "make install")
Moderator
Posts: 5,316
Registered: ‎2009-09-02

Re: Transmission 2.42 on readynas : OK

2.42 addon is out
If you like my add-ons - Si vous aimez mes add-ons :
EN/US: --- -------- FR: or Paypal @mail: readynas@orange.fr
Where I'm teaching
4B Perros
Occasional Contributor
Posts: 9
Registered: ‎2009-10-20

Re: Transmission 2.42 on readynas : OK

super-poussin wrote:
2.42 addon is out

thanks :wink:
Contributor
Posts: 28
Registered: ‎2011-09-28

Re: Transmission 2.42 on readynas : OK

super-poussin wrote:
2.42 addon is out


is there any plan to release this standalone for x86?
Contributor
Posts: 36
Registered: ‎2009-07-11

Re: Transmission 2.42 on readynas : OK

Everytime I've tried to install many of the latest versions of Transmission, I always get the popup error :

"The Transmission add-on encountered an error during installation."

A few seconds later come the three popup menus telling me to adjust my settings.json and it's installed. However, I have had problems getting any of them to actually start (they appear started in the frontview GUI, but via SSH everything seems dead and won't start).

I realise there is little support around this addon, so have been trying for a couple of months on and off to fix it myself. Does anyone know WHERE the error encountered during installation would be logged ? Or anyway of disassembling the "bin" add-on file to look at the scripts (maybe I'm using a share directory name than conflicts with the install, etc.) ?

Many thanks,
Ben
Moderator
Posts: 5,316
Registered: ‎2009-09-02

Re: Transmission 2.42 on readynas : OK

baygacon wrote:
super-poussin wrote:
2.42 addon is out


is there any plan to release this standalone for x86?



x86 verwion is out available in frontview , will also publish a link
If you like my add-ons - Si vous aimez mes add-ons :
EN/US: --- -------- FR: or Paypal @mail: readynas@orange.fr
Where I'm teaching
4B Perros
Discussion Stats
  • 15 replies
  • 29 views
  • 0 kudos
  • 10 in conversation
Top Contributors
User Kudos Count
1