GS716Tv3 agentPortSecurityMACAddressAdd Not writeable
The SNMP agentPortSecurityMACAddressAdd is shown to be a read/write OBJECT-TYPE, but it is not writeable or I don't understand how to craft the SNMPset command.
Hardware = GS716TV3
Firmware = 6.3.1.19
Examples of tested snmpsets (note all of these result in the same output):
snmpset -Ob -v3 -a SHA -x DES -X snmpv3string -u admin -A somepassword -l authPriv A.B.C.D 1.3.6.1.4.1.4526.11.20.1.2.1.8.6 s "1234 11:22:33:44:55:66" snmpset -Ob -v3 -a SHA -x DES -X snmpv3string -u admin -A somepassword -l authPriv A.B.C.D 1.3.6.1.4.1.4526.11.20.1.2.1.8.6 s 1234 11:22:33:44:55:66 snmpset -Ob -v3 -a SHA -x DES -X snmpv3string -u admin -A somepassword -l authPriv A.B.C.D 1.3.6.1.4.1.4526.11.20.1.2.1.8.6 s "1234 11:22:33:44:55:66 1" snmpset -Ob -v3 -a SHA -x DES -X snmpv3string -u admin -A somepassword -l authPriv A.B.C.D 1.3.6.1.4.1.4526.11.20.1.2.1.8.6 = STRING: "1234 11:22:33:44:55:66" snmpset -Ob -v3 -a SHA -x DES -X snmpv3string -u admin -A somepassword -l authPriv A.B.C.D 1.3.6.1.4.1.4526.11.20.1.2.1.8.6 = STRING: '1234 11:22:33:44:55:66' snmpset -Ob -v3 -a SHA -x DES -X snmpv3string -u admin -A somepassword -l authPriv A.B.C.D 1.3.6.1.4.1.4526.11.20.1.2.1.8.6=STRING:"1234 11:22:33:44:55:66" snmpset -Ob -v3 -a SHA -x DES -X snmpv3string -u admin -A somepassword -l authPriv A.B.C.D 1.3.6.1.4.1.4526.11.20.1.2.1.8.6 =STRING:"1234 11:22:33:44:55:66" snmpset -Ob -v3 -a SHA -x DES -X snmpv3string -u admin -A somepassword -l authPriv A.B.C.D 1.3.6.1.4.1.4526.11.20.1.2.1.8.6 = STRING:"1234 11:22:33:44:55:66" snmpset -Ob -v3 -a SHA -x DES -X snmpv3string -u admin -A somepassword -l authPriv A.B.C.D 1.3.6.1.4.1.4526.11.20.1.2.1.8.6 STRING:"1234 11:22:33:44:55:66" snmpset -Ob -v3 -a SHA -x DES -X snmpv3string -u admin -A somepassword -l authPriv A.B.C.D 1.3.6.1.4.1.4526.11.20.1.2.1.8.6 s"1234 11:22:33:44:55:66" snmpset -Ob -v3 -a SHA -x DES -X snmpv3string -u admin -A somepassword -l authPriv A.B.C.D 1.3.6.1.4.1.4526.11.20.1.2.1.8.6 s"1234 11:22:33:44:55:66" snmpset -Ob -v3 -a SHA -x DES -X snmpv3string -u admin -A somepassword -l authPriv A.B.C.D 1.3.6.1.4.1.4526.11.20.1.2.1.8.6 S "1234 11:22:33:44:55:66" snmpset -Ob -v3 -a SHA -x DES -X snmpv3string -u admin -A somepassword -l authPriv A.B.C.D 1.3.6.1.4.1.4526.11.20.1.2.1.8.6 s 1234 11:22:33:44:55:66
All yield this as output:
"Error in packet.
Reason: commitFailed"
Notice that I can do a get and output shows empty string (as expected):
snmpget -Ob -v3 -a SHA -x DES -X snmpv3string -u admin -A somepassword -l authPriv A.B.C.D 1.3.6.1.4.1.4526.11.20.1.2.1.8.6
iso.3.6.1.4.1.4526.11.20.1.2.1.8.6 = ""
So question is, why has Netgear made the OID "1.3.6.1.4.1.4526.11.20.1.2.1.8" un-writeable when in the MIB is is shown to be read/write?
