Introducing the Orbi 970 Series Mesh System with WiFi 7 technology. For more information visit the NETGEAR Press Room.
This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
Start a New Discussion
HI Support
we have the remote station use SonicWALL TZ500 + GS728TPPv2 could switch setup on customer site.
We all set up on SonicWALL TZ500, the details are:
LAN X0 Prot IP: 10.255.255.254, Mask:255.255.255.0, DHCP: 10.255.255.100 to 200
SonicWALL TZ500 X0 port connect to Switch 24 Port, and we connect one WAX610 Wifi provide to customer connect VLAN network to use.
WAX610 WiFi equipment connect to switch 1 port.
VLAN Port: 10.255.100.254, Mask:255.255.255.0, VLAN DHCP: 10.255.100.100 to 200
The problem now is that I cannot let customers obtain the IP address of the VLAN. How do I set up a VLAN trunk on the switch?
Solved! Go to Solution.
@SamWeng wrote: HI Support
Hi Sam,
This is the Netgear Community, not Netgear Support here.
.
@SamWeng wrote: How do I set up a VLAN trunk on the switch?
How do I set up a VLAN trunk on the switch?
Switching > VLAN > Advanced > VLAN Membership
Select the VLAN you want on the trunk (port or LAG), and mark these as [T]agged.
Regards,
-Kurt
View solution in original post
