GSM5212P SNMP OID for reading Ouput Voltage and current and pethPsePortAdminEnable.X command

[Seb06]

Hello to the community,

I try to read output POE voltage and current from a GSM5212P and a also need to switch on and off a port with  pethPsePortAdminEnable.X  via SNMP.

I find only a limited set of value.

Is a switch limitation or maybe i do something wrong

Switch have firmware : 10.0.2.26

snmpwalk -v 2c -c private 192.168.10.253   powerEthernetMIB :

POWER-ETHERNET-MIB::pethPsePortPowerClassifications.1.3 = INTEGER: class0(1)
POWER-ETHERNET-MIB::pethPsePortPowerClassifications.1.4 = INTEGER: class3(4)
POWER-ETHERNET-MIB::pethPsePortPowerClassifications.1.5 = INTEGER: class0(1)
POWER-ETHERNET-MIB::pethPsePortPowerClassifications.1.6 = INTEGER: class1(2)
POWER-ETHERNET-MIB::pethMainPsePower.1 = Gauge32: 120000 Watts
POWER-ETHERNET-MIB::pethMainPseOperStatus.1 = INTEGER: on(1)
POWER-ETHERNET-MIB::pethMainPseConsumptionPower.1 = Gauge32: 15900 Watts
POWER-ETHERNET-MIB::pethMainPseUsageThreshold.1 = INTEGER: 90 %
POWER-ETHERNET-MIB::pethNotificationControlEnable.1 = INTEGER: true(1)

and snmpwalk -v 2c -c private 192.168.10.253 fastPathpowerEthernetMIB

NETGEAR-POWER-ETHERNET-MIB::agentPethPortReset.1.1 = INTEGER: none(0)
NETGEAR-POWER-ETHERNET-MIB::agentPethPortReset.1.2 = INTEGER: none(0)
NETGEAR-POWER-ETHERNET-MIB::agentPethPortReset.1.3 = INTEGER: none(0)
NETGEAR-POWER-ETHERNET-MIB::agentPethPortReset.1.4 = INTEGER: none(0)
NETGEAR-POWER-ETHERNET-MIB::agentPethPortReset.1.5 = INTEGER: none(0)
NETGEAR-POWER-ETHERNET-MIB::agentPethPortReset.1.6 = INTEGER: none(0)
NETGEAR-POWER-ETHERNET-MIB::agentPethPortReset.1.7 = INTEGER: none(0)
NETGEAR-POWER-ETHERNET-MIB::agentPethPortReset.1.8 = INTEGER: none(0)
NETGEAR-POWER-ETHERNET-MIB::agentPethPortReset.1.9 = INTEGER: none(0)
NETGEAR-POWER-ETHERNET-MIB::agentPethPortReset.1.10 = INTEGER: none(0)
NETGEAR-POWER-ETHERNET-MIB::agentPethPortReset.1.11 = INTEGER: none(0)
NETGEAR-POWER-ETHERNET-MIB::agentPethPortReset.1.12 = INTEGER: none(0)
NETGEAR-POWER-ETHERNET-MIB::agentPethPowerLimitMin.1.1 = Gauge32: 3000 Milliwatts
NETGEAR-POWER-ETHERNET-MIB::agentPethPowerLimitMin.1.2 = Gauge32: 3000 Milliwatts
NETGEAR-POWER-ETHERNET-MIB::agentPethPowerLimitMin.1.3 = Gauge32: 3000 Milliwatts
NETGEAR-POWER-ETHERNET-MIB::agentPethPowerLimitMin.1.4 = Gauge32: 3000 Milliwatts
NETGEAR-POWER-ETHERNET-MIB::agentPethPowerLimitMin.1.5 = Gauge32: 3000 Milliwatts
NETGEAR-POWER-ETHERNET-MIB::agentPethPowerLimitMin.1.6 = Gauge32: 3000 Milliwatts
NETGEAR-POWER-ETHERNET-MIB::agentPethPowerLimitMin.1.7 = Gauge32: 3000 Milliwatts
NETGEAR-POWER-ETHERNET-MIB::agentPethPowerLimitMin.1.8 = Gauge32: 3000 Milliwatts
NETGEAR-POWER-ETHERNET-MIB::agentPethPowerLimitMin.1.9 = Gauge32: 3000 Milliwatts
NETGEAR-POWER-ETHERNET-MIB::agentPethPowerLimitMin.1.10 = Gauge32: 3000 Milliwatts
NETGEAR-POWER-ETHERNET-MIB::agentPethPowerLimitMin.1.11 = Gauge32: 3000 Milliwatts
NETGEAR-POWER-ETHERNET-MIB::agentPethPowerLimitMin.1.12 = Gauge32: 3000 Milliwatts
NETGEAR-POWER-ETHERNET-MIB::agentPethPowerLimitMax.1.1 = Gauge32: 32000 Milliwatts
NETGEAR-POWER-ETHERNET-MIB::agentPethPowerLimitMax.1.2 = Gauge32: 32000 Milliwatts
NETGEAR-POWER-ETHERNET-MIB::agentPethPowerLimitMax.1.3 = Gauge32: 32000 Milliwatts
NETGEAR-POWER-ETHERNET-MIB::agentPethPowerLimitMax.1.4 = Gauge32: 32000 Milliwatts
NETGEAR-POWER-ETHERNET-MIB::agentPethPowerLimitMax.1.5 = Gauge32: 32000 Milliwatts
NETGEAR-POWER-ETHERNET-MIB::agentPethPowerLimitMax.1.6 = Gauge32: 32000 Milliwatts
NETGEAR-POWER-ETHERNET-MIB::agentPethPowerLimitMax.1.7 = Gauge32: 32000 Milliwatts
NETGEAR-POWER-ETHERNET-MIB::agentPethPowerLimitMax.1.8 = Gauge32: 32000 Milliwatts
NETGEAR-POWER-ETHERNET-MIB::agentPethPowerLimitMax.1.9 = Gauge32: 32000 Milliwatts
NETGEAR-POWER-ETHERNET-MIB::agentPethPowerLimitMax.1.10 = Gauge32: 32000 Milliwatts
NETGEAR-POWER-ETHERNET-MIB::agentPethPowerLimitMax.1.11 = Gauge32: 32000 Milliwatts
NETGEAR-POWER-ETHERNET-MIB::agentPethPowerLimitMax.1.12 = Gauge32: 32000 Milliwatts
NETGEAR-POWER-ETHERNET-MIB::agentPethMainPseLegacy.1 = INTEGER: true(1)

[DaneA]

Hi Seb06,

I just want to confirm.  Since you are already using the latest firmware v10.0.2.26, are you also using the latest MIB v10.0.2.26?  If not yet, kindly download it here, then use it.  Let us know if it helps. 

Regards,

DaneA

NETGEAR Community Team

[Seb06]

Hi DaneA,

Yes I use MIB file v10.0.2.26.

Regards,

Seb06

[DaneA]

@Seb06,

I inquired your concern to the higher tier of NETGEAR Support.  I will post here on this forum thread once I got a feedback. 

Regards,

DaneA

NETGEAR Community Team

[DaneA]

@Seb06,

I just got a feedback from the higher tier of NETGEAR Support.  As per the higher tier of NETGEAR Support, according to SNMP Supported MIBS on the GSM5212P switch, the POWER-ETHERNET-MIB is a supported MIB. Within the POWER-ETHERNET-MIB, the value pethPsePortAdminEnable is present so this should work. 

May we know what SNMP tool are you using? 

Regards,

DaneA

NETGEAR Community Team

[DaneA]

@Seb06,

I just want to follow-up on this.  May we know what SNMP tool are you using?  Let us know if you have further questions as well. 

Regards,

DaneA

NETGEAR Community Team