× NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Orbi WiFi 7 RBE973
Reply

How to limit port speed on M5300 switch

mgaudette
Aspirant

How to limit port speed on M5300 switch

Hi,

 

I have a pair of M5300 switches (stacked), and on one of its ports I have a device that sometimes saturates our 100Mbit/s uplink. Its traffic is legitimate (remote backups) but it impacts everybody's network.  I do not want to limit it to 10Mbit/s (too slow) but would love to limit its port speed to something closer to 80Mbit/s, leaving around 20Mbit/s for general internet use.

 

We upgraded from a GS724T to these M5300, and the GS724T had a very obvious way of limiting port speed.  I am fairly confident that this can also be done with the M5300, but I cannot find how to do so.

 

If worst comes to worst, limiting by MAC address or IP would also be a solution, but I would rather have a simple per-port limit. 

 

I am running firmware 11.0.0.31 (latest as of this port).

 

I would appreciate any help to find where I would be able to do this.

 

Model: M5300-28G3 (GSM7328Sv2h2)|ProSAFE 24-port Managed L3 Gigabit Stackable Switch
Message 1 of 3
Retired_Member
Not applicable

Re: How to limit port speed on M5300 switch

Hi @mgaudette,

 

Welcome to the community!

If you want limit the uplink speed based on port on switch M5300. I suggest DiffServ function is available for you.

Below is the config step:

1. Class - Create classes and define class criteria.

Example: Class name is test, and match every;
2. Policy - Create policies, associate classes with policies, and define policy statements.

Example: Policy name is p1, Policy type is in, Member class is test;
3. Service - Add a policy to an inbound interface.

Example: port 1/0/1, select Policy in name to p1, then click apply button;

 

For detailed configuration about DiffServ, please refer to Link (page 524)

 



Hope it helps!

Regards,

EricZ
NETGEAR employee

Message 2 of 3
mgaudette
Aspirant

Re: How to limit port speed on M5300 switch

Thank you - will try this 

Message 3 of 3
Top Contributors
Discussion stats
  • 2 replies
  • 1305 views
  • 0 kudos
  • 2 in conversation
Announcements